Bioactive glass coated zirconia for dental implants: A review

Kaiqiang Zhang; Quyet Van Le

doi:10.29252/jcc.2.1.2

Authors

Kaiqiang Zhang School of Chemistry and Chemical Engineering, Nanjing University, Nanjing 210023, China
Quyet Van Le Institute of Research and Development, Duy Tan University, Da Nang, 550000, Vietnam

DOI:

https://doi.org/10.29252/jcc.2.1.2

Keywords:

Bioactive glass coating, Zirconia, Dental implants, Nanocomposites

Abstract

Nowadays zirconia, due to its interesting properties e.g. biocompatibility, strength, aesthetic, chemical and mechanical properties, has got lots of attention for dental implants. On the other hand, bioactive glasses have been used as coating on tougher substrates such as zirconia. Bioactive glass coatings can decrease the healing time and hence accelerate the formation of the bond between bone and implant. Hence in this study, we introduce the novel zirconia/bioactive glass composites with high mechanical strength and bioactivity to achieve the ideal implant dentistry. Furthermore, a review of bioactive glass coatings (i.e. 45S5 and 58S) on zirconia as well as surface modification methods (i.e. sol-gel, laser cladding, plasma spraying, etc.) is provided.

References

S. Mohammadpour, S.J.I.j.o.e. Khorramymehr, technology, Comparing one- and two-piece dental abutments under dynamic loading: A 3-D finite element analysis, 11 (2019) 73-79.

A. TV, SIGN IN/REGISTER, Compendium (2020).

M. Assery, A 22-Year Follow Up of Immediate Implant Placement without Bone Augmentation: A Case Series Study, Journal of Prosthodontics 29(2) (2020) 101-106.

Z.M. Al-Sadah, M.S. AlShakhas, Osseous Integration After Exenteration, in: T.E. Johnson (Ed.), Anophthalmia : The Expert’s Guide to Medical and Surgical Management, Springer International Publishing, Cham, 2020, pp. 107-126.

B.R. Chrcanovic, J. Kisch, T. Albrektsson, A. Wennerberg, A retrospective study on clinical and radiological outcomes of oral implants in patients followed up for a minimum of 20 years, Clinical Implant Dentistry and Related Research 20(2) (2018) 199-207.

K.E. Dux, Implantable Materials Update, Clinics in Podiatric Medicine and Surgery 36(4) (2019) 535-542.

S.D. Shah, Implant Strength After Implantoplasty, The Ohio State University, 2019.

M.D. Fahmy, A. Gupta, A. Guentsch, A. Peisker, Materials Used Intraoper-atively During Oral and Maxillofacial Surgery Procedures, in: L. Tayebi (Ed.), Applications of Biomedical Engineering in Dentistry, Springer International Pub-lishing, Cham, 2020, pp. 21-42.

R. Das, C. Bhattacharjee, 16 - Titanium-based nanocomposite materials for dental implant systems, in: A.M. Asiri, Inamuddin, A. Mohammad (Eds.), Appli-cations of Nanocomposite Materials in Dentistry, Woodhead Publishing, London, 2019, pp. 271-284.

R.B. Osman, M.V. Swain, A critical review of dental implant materials with an emphasis on titanium versus zirconia, Materials 8(3) (2015) 932-958.

J. Wu, X. Xie, H. Zhou, F.R. Tay, M.D. Weir, M.A.S. Melo, T.W. Oates, N. Zhang, Q. Zhang, H.H.K. Xu, Development of a new class of self-healing and therapeutic dental resins, Polymer Degradation and Stability 163 (2019) 87-99.

X. Zhou, X. Huang, M. Li, X. Peng, S. Wang, X. Zhou, L. Cheng, Devel-opment and status of resin composite as dental restorative materials, Journal of Applied Polymer Science 136(44) (2019) 48180.

H. Chen, R. Wang, L. Qian, H. Liu, J. Wang, M. Zhu, Surface modification of urchin-like serried hydroxyapatite with sol-gel method and its application in dental composites, Composites Part B: Engineering 182 (2020) 107621.

A. Mzyk, G. Imbir, K. Trembecka-Wójciga, J.M. Lackner, H. Plutecka, E. Jasek-Gajda, J. Kawa?ko, R. Major, Rolling or Two-Stage Aggregation of Platelets on the Surface of Thin Ceramic Coatings under in Vitro Simulated Blood Flow Conditions, ACS Biomaterials Science & Engineering 6(2) (2020) 898-911.

J. Mallya, N. DuVall, J. Brewster, H. Roberts, Endodontic Access Effect on Full Contour Zirconia and Lithium Disilicate Failure Resistance, Operative Dentistry 45(3) (2020) 276-285.

P. Maló, M. Nunes, M. de Araújo Nobre, A. Lopes, A. Ferro, Extramaxillary Zygomatic Implants, in: J. Chow (Ed.), Zygomatic Implants: Optimization and Innovation, Springer International Publishing, Cham, 2020, pp. 87-107.

O. Jung, D. Porchetta, M.-L. Schroeder, M. Klein, N. Wegner, F. Walther, F. Feyerabend, M. Barbeck, A. Kopp, In Vivo Simulation of Magnesium Degradabil-ity Using a New Fluid Dynamic Bench Testing Approach, International Journal of Molecular Sciences 20(19) (2019).

N. Shrivastava, H. Barbosa, K. Ali, S.K. Sharma, Materials for Solar Cell Ap-plications: An Overview of TiO2, ZnO, Upconverting Organic and Polymer-Based Solar Cells, in: S.K. Sharma, K. Ali (Eds.), Solar Cells: From Materials to Device Technology, Springer International Publishing, Cham, 2020, pp. 55-78.

A.I. Kozelskaya, E.N. Bolbasov, A.S. Golovkin, A.I. Mishanin, A.N. Viknianshchukb, E.V. Shesterikov, A.H. Ashrafov, V.A. Novikov, S.I. Tverdokhlebov, Modification of the zirconia ceramics by different calcium phosphate coatings: comparative study, arXiv preprint arXiv:1712.00944 (2017).

L. Grima, M. Díaz-Pérez, J. Gil, D. Sola, I.J. Peña, Generation of a Porous Scaffold with a Starting Composition in the CaO–SiO2–MgO–P2O5 System in a Simulated Physiological Environment, Applied Sciences 10(1) (2019).

J.L. Guo, T.C. Piepergerdes, A.G. Mikos, Chapter 6 - Bone graft engineering: Composite scaffolds, in: H. Alghamdi, J. Jansen (Eds.), Dental Implants and Bone Grafts, Woodhead Publishing, London, 2020, pp. 159-181.

M. Wöltje, R. Brünler, M. Böbel, S. Ernst, S. Neuss, D. Aibibu, C. Cherif, Functionalization of Silk Fibers by PDGF and Bioceramics for Bone Tissue Regeneration, 10(1) (2020) 8.

A. Ralls, P. Kumar, M. Misra, P.L. Menezes, Material Design and Surface Engineering for Bio-implants, JOM 72(2) (2020) 684-696.

A. Bharadwaz, A.C. Jayasuriya, Recent trends in the application of widely used natural and synthetic polymer nanocomposites in bone tissue regeneration, Materials Science and Engineering: C 110 (2020) 110698.

S.J. Sadowsky, Has zirconia made a material difference in implant prostho-dontics? A review, Dental Materials 36(1) (2020) 1-8.

K.-y. Cheng, V. Gopal, M. McNallan, G. Manivasagam, M.T. Mathew, En-hanced Tribocorrosion Resistance of Hard Ceramic Coated Ti-6Al-4V Alloy for Hip Implant Application: In-Vitro Simulation Study, ACS Biomaterials Science & Engineering 5(9) (2019) 4817-4824.

M. Giri, K. Sabapathy, B. Govindasamy, H. Rajamurugan, Evaluation of in-sertion torque and surface integrity of zirconia-coated titanium mini screw im-plants, Journal of the World Federation of Orthodontists 9(1) (2020) 13-17.

D. Faria, S. Madeira, M. Buciumeanu, F.S. Silva, O. Carvalho, Novel laser textured surface designs for improved zirconia implants performance, Materials Science and Engineering: C 108 (2020) 110390.

Z. Özkurt, E. Kazazo?lu, Zirconia dental implants: a literature review, Journal of oral implantology 37(3) (2011) 367-376.

S. Amtul Haseeb, S.M. Abdul Khader, B. Satish Shenoy, Y.G. Naveen, P. Gi-ridhar Kamath, K.C. Vinaya, Comparative evaluation of stress distribution in bone surrounding implant using different implant biomaterials: A 3DFEA study, Journal of Computational Methods in Sciences and Engineering 19 (2019) 523-532.

E. Kontonasaki, P. Giasimakopoulos, A.E. Rigos, Strength and aging resis-tance of monolithic zirconia: an update to current knowledge, Japanese Dental Science Review 56(1) (2020) 1-23.

A.W. Suci Dharmayanti, R. Dubey, N.K. Dubey, W.-P. Deng, Chapter 26 - Implant surface modification strategies through antibacterial and bioactive com-ponents, in: K. Pal, I. Banerjee, P. Sarkar, D. Kim, W.-P. Deng, N.K. Dubey, K. Majumder (Eds.), Biopolymer-Based Formulations, Elsevier2020, pp. 647-673.

M. Araújo, M. Miola, A. Venturello, G. Baldi, J. Pérez, E. Verné, Glass coat-ings on zirconia with enhanced bioactivity, Journal of the European Ceramic Soci-ety 36(13) (2016) 3201-3210.

N. Kong, A. Chen, W. Yan, H. Zhang, Ceramic implant fracture: A clinical report, The Journal of prosthetic dentistry 122(5) (2019) 425-429.

B. Mansfield, S. Torres, T. Yu, D. Wu, A Review on Additive Manufacturing of Ceramics, ASME 2019 14th International Manufacturing Science and Engineering Conference, American Society of Mechanical Engineers Digital Collection, 2019.

X. He, F.-X. Reichl, S. Milz, B. Michalke, X. Wu, C.M. Sprecher, Y. Yang, M. Gahlert, S. Röhling, H. Kniha, R. Hickel, C. Högg, Titanium and zirconium release from titanium- and zirconia implants in mini pig maxillae and their toxicity in vitro, Dental Materials 36(3) (2020) 402-412.

S. Madeira, A. Barbosa, C.G. Moura, M. Buciumeanu, F.S. Silva, O. Carval-ho, Aunps and Ag?ps-functionalized zirconia surfaces by hybrid laser technology for dental implants, Ceramics International 46(6) (2020) 7109-7121.

M. Koller, E. Steyer, K. Theisen, S. Stagnell, N. Jakse, M. Payer, Two-piece zirconia versus titanium implants after 80 months: Clinical outcomes from a prospective randomized pilot trial, Clinical Oral Implants Research 31(4) (2020) 388-396.

H. Gul, M. Khan, A.S. Khan, 3 - Bioceramics: types and clinical applications, in: A.S. Khan, A.A. Chaudhry (Eds.), Handbook of Ionic Substituted Hydroxyap-atites, Woodhead Publishing, London, 2020, pp. 53-83.

Y. Liu, B. Rath, M. Tingart, J. Eschweiler, Role of implants surface modifi-cation in osseointegration: A systematic review, Journal of Biomedical Materials Research Part A 108(3) (2020) 470-484.

P. Tidehag, Z. Shen, Digital dentistry calls the change of ceramics and ceramic processes, Advances in Applied Ceramics 118(1-2) (2019) 83-90.

Y.S. Soo, N. Silikas, J. Satterthwaite, Measurement of Fracture Strength of Zirconia Dental Implant Abutments with Internal and External Connections Using Acoustic Emission, Materials 12(12) (2019).

S. Attia, H. Schaaf, T. El Khassawna, D. Malhan, K. Mausbach, H.-P. How-aldt, P. Streckbein, Oral Rehabilitation of Hypodontia Patients Using an Endosse-ous Dental Implant: Functional and Aesthetic Results, Journal of Clinical Medi-cine 8(10) (2019) 1687.

G. Bryce, N. Diessner, K. Hemmings, N. MacBeth, Solutions for implants placed with prosthetic inconvenience, Dental Update 46(11) (2019) 1003-1014.

M. Uno, Y. Doi, Y. Yokokawa, H. Kawaki, T. Oka, Y. Tamaki, H. Ishigami, Investigating the effectiveness of ceramic materials, particularly zirconium oxide, and the advantages the white metal holds over traditional materials used in dentist-ry, Impact 2019(2) (2019) 68-70.

F.H. Schünemann, M.E. Galárraga-Vinueza, R. Magini, M. Fredel, F. Silva, J.C. Souza, Y. Zhang, B. Henriques, Zirconia surface modifications for implant dentistry, Materials Science and Engineering: C 98 (2019) 1294-1305.

J. Mesquita-Guimarães, R. Detsch, A.C. Souza, B. Henriques, F.S. Silva, A.R. Boccaccini, O. Carvalho, Cell adhesion evaluation of laser-sintered HAp and 45S5 bioactive glass coatings on micro-textured zirconia surfaces using MC3T3-E1 os-teoblast-like cells, Materials Science and Engineering: C 109 (2020) 110492.

S. Hussain, E. Aneggi, S. Briguglio, M. Mattiussi, V. Gelao, I. Cabras, L. Zorzenon, A. Trovarelli, D. Goi, Enhanced ibuprofen removal by heteroge-neous-Fenton process over Cu/ZrO2 and Fe/ZrO2 catalysts, Journal of Environ-mental Chemical Engineering 8(1) (2020) 103586.

B. Mjöberg, Is early migration enough to explain late clinical loosening of hip prostheses?, EFORT Open Reviews 5(2) (2020) 113-117.

F.H. Schünemann, M.E. Galárraga-Vinueza, R. Magini, M. Fredel, F. Silva, J.C.M. Souza, Y. Zhang, B. Henriques, Zirconia surface modifications for implant dentistry, Materials Science and Engineering: C 98 (2019) 1294-1305.

A. Roccuzzo, S. Marchese, N. Worsaae, S.S. Jensen, The sandwich osteotomy technique to treat vertical alveolar bone defects prior to implant placement: a sys-tematic review, Clinical Oral Investigations 24(3) (2020) 1073-1089.

M. Chiapasco, G. Tommasato, D. Palombo, M. Del Fabbro, A retrospective 10-year mean follow-up of implants placed in ridges grafted using autogenous mandibular blocks covered with bovine bone mineral and collagen membrane, Clinical Oral Implants Research 31(4) (2020) 328-340.

E. Askari, I.F. Cengiz, J.L. Alves, B. Henriques, P. Flores, M.C. Fredel, R.L. Reis, J.M. Oliveira, F.S. Silva, J. Mesquita-Guimarães, Micro-CT based finite ele-ment modelling and experimental characterization of the compressive mechanical properties of 3-D zirconia scaffolds for bone tissue engineering, Journal of the Mechanical Behavior of Biomedical Materials 102 (2020) 103516.

Y. Cao, T. Shi, C. Jiao, H. Liang, R. Chen, Z. Tian, A. Zou, Y. Yang, Z. Wei, C. Wang, L. Shen, Fabrication and properties of zirconia/hydroxyapatite compos-ite scaffold based on digital light processing, Ceramics International 46(2) (2020) 2300-2308.

V. Lalzawmliana, A. Anand, M. Roy, B. Kundu, S.K. Nandi, Mesoporous bioactive glasses for bone healing and biomolecules delivery, Materials Science and Engineering: C 106 (2020) 110180.

A.-M. Pobloth, M.J. Mersiowsky, L. Kliemt, H. Schell, A. Dienelt, B.M. Pfitzner, R. Burgkart, R. Detsch, D. Wulsten, A.R. Boccaccini, G.N. Duda, Bioac-tive coating of zirconia toughened alumina ceramic implants improves cancellous osseointegration, Scientific Reports 9(1) (2019) 16692.

A. Kirsten, A. Hausmann, M. Weber, J. Fischer, H. Fischer, Bioactive and thermally compatible glass coating on zirconia dental implants, Journal of dental research 94(2) (2015) 297-303.

M. Roy, A. Pompella, J. Kubacki, A. Piosik, B. Psiuk, J. Klimontko, J. Szade, R.A. Roy, W. Hedzelek, Photofunctionalization of dental zirconia oxide: Surface modification to improve bio-integration preserving crystal stability, Colloids and Surfaces B: Biointerfaces 156 (2017) 194-202.

M.S. Abd-Elwahed, A. Wagih, I.M.R. Najjar, Correlation between micro/na-no-structure, mechanical and tribological properties of copper-zirconia nanocom-posites, Ceramics International 46(1) (2020) 56-65.

Z. Fattahi, S.A. Sajjadi, A. Babakhani, F. Saba, Ni–Cr matrix composites re-inforced with nano- and micron-sized surface-modified zirconia: Synthesis, micro-structure and mechanical properties, Journal of Alloys and Compounds 817 (2020) 152755.

A. Katsavochristou, M. Sierraalta, B. Saglik, D. Koumoulis, F. George, M. Razzoog, Implant Angulation Effect on the Fracture Resistance of Monolithic Zirconia Custom Abutments: An In Vitro Study, Journal of Prosthodontics 29(5) (2020) 394-400.

R. Pilo, M. Folkman, A. Arieli, S. Levartovsky, Marginal Fit and Retention Strength of Zirconia Crowns Cemented by Self-adhesive Resin Cements, Opera-tive Dentistry 43(2) (2018) 151-161.

K.I. Afrashtehfar, M. Del Fabbro, Clinical performance of zirconia implants: A meta-review, The Journal of Prosthetic Dentistry 123(3) (2020) 419-426.

K. Sivaraman, A. Chopra, A.I. Narayan, D. Balakrishnan, Is zirconia a viable alternative to titanium for oral implant? A critical review, Journal of Prosthodontic Research 62(2) (2018) 121-133.

Y. Iinuma, M. Hirota, T. Hayakawa, C. Ohkubo, Surrounding Tissue Response to Surface-Treated Zirconia Implants, Materials 13(1) (2019) 30.

M. AlAmar, F. Alqahtani, Effect of Different Implant-Abutment Connection Materials on the Fracture Resistance of Zirconia Abutments, Journal of Oral Implantology 46(2) (2020) 88-92.

D.-J. Lee, J.-S. Ryu, M. Shimono, K.-W. Lee, J.-M. Lee, H.-S. Jung, Differen-tial Healing Patterns of Mucosal Seal on Zirconia and Titanium Implant, Frontiers in Physiology 10(796) (2019).

K. Mizuno, A. Torosian, S. Jivraj, Laboratory Fabrication of Full-Arch Im-plant-Supported Restorations, in: S. Jivraj (Ed.), Graftless Solutions for the Eden-tulous Patient, Springer International Publishing, Cham, 2018, pp. 261-320.

U. Schepke, M.M.M. Gresnigt, W.R. Browne, S. Abdolahzadeh, J. Nijkamp, M.S. Cune, Phase transformation and fracture load of stock and CAD/CAM-cus-tomized zirconia abutments after 1 year of clinical function, Clinical Oral Implants Research 30(6) (2019) 559-569.

E. Schwarzer, S. Holtzhausen, U. Scheithauer, C. Ortmann, T. Oberbach, T. Moritz, A. Michaelis, Process development for additive manufacturing of func-tionally graded alumina toughened zirconia components intended for medical im-plant application, Journal of the European Ceramic Society 39(2) (2019) 522-530.

H. Cai, J. Chen, C. Li, J. Wang, Q. Wan, X. Liang, Quantitative discoloration assessment of peri-implant soft tissue around zirconia and other abutments with different colours: A systematic review and meta-analysis, Journal of Dentistry 70 (2018) 110-117.

F. Tabatabaian, Color in Zirconia-Based Restorations and Related Factors: A Literature Review, Journal of Prosthodontics 27(2) (2018) 201-211.

A. Wachtel, T. Zimmermann, M. Sütel, U. Adali, M. Abou-Emara, W.-D. Müller, S. Mühlemann, A.D. Schwitalla, Bacterial leakage and bending moments of screw-retained, composite-veneered PEEK implant crowns, Journal of the Me-chanical Behavior of Biomedical Materials 91 (2019) 32-37.

M. Boniecki, T. Sadowski, P. Go??biewski, H. W?glarz, A. Pi?tkowska, M. Romaniec, K. Krzy?ak, K. ?osiewicz, Mechanical properties of alumina/zirconia composites, Ceramics International 46(1) (2020) 1033-1039.

Z. Ma, Z. Wang, X. Wang, T. Yu, Effects of laser-assisted grinding on surface integrity of zirconia ceramic, Ceramics International 46(1) (2020) 921-929.

D. Silva-Herzog Rivera, A. Pozos-Guillen, A. Aragón-Piña, B.I. Cerda-Cristerna, D. Masuoka-Ito, L.O. Sánchez-Vargas, Glass coatings to enhance the interfacial bond strength between veneering ceramic and zirconia, Odontology 108(3) (2020) 415-423.

M. Ji, J. Xu, M. Chen, M. El Mansori, Enhanced hydrophilicity and tribo-logical behavior of dental zirconia ceramics based on picosecond laser surface texturing, Ceramics International 46(6) (2020) 7161-7169.

S.A. Omar, Y. Castro, J. Ballarre, W.H. Schreiner, A. Durán, S.M. Ceré, Mag-nesium alloys implants coated with 58S sol-gel bioactive glass to retard first stage corrosion, Corrosion 73(12) (2017) 1448-1460.

M. Abdelraof, M.S. Hasanin, M.M. Farag, H.Y. Ahmed, Green synthesis of bacterial cellulose/bioactive glass nanocomposites: Effect of glass nanoparticles on cellulose yield, biocompatibility and antimicrobial activity, International Jour-nal of Biological Macromolecules 138 (2019) 975-985.

Q. Nawaz, M.A. Ur Rehman, J.A. Roether, L. Yufei, A. Grünewald, R. Detsch, A.R. Boccaccini, Bioactive glass based scaffolds incorporating gelatin/manganese doped mesoporous bioactive glass nanoparticle coating, Ceramics International 45(12) (2019) 14608-14613.

S. Ali, I. Farooq, A.M. Al-Thobity, K.S. Al-Khalifa, K. Alhooshani, S. Sauro, An in-vitro evaluation of fluoride content and enamel remineralization potential of two toothpastes containing different bioactive glasses, Bio-Medical Materials and Engineering 30 (2019) 487-496.

J. Mesquita-Guimarães, B. Henriques, F. Silva, Bioactive glass coatings, Bio-active Glasses, Elsevier, USA, 2018, pp. 103-118.

S.M. Rabiee, M. Azizian, Effect of zirconia concentration on the growth of nanowires in bioactive glass–ceramic coatings, International Journal of Applied Ceramic Technology 10(1) (2013) 33-39.

S. Ferraris, S. Yamaguchi, N. Barbani, M. Cazzola, C. Cristallini, M. Miola, E. Vernè, S. Spriano, Bioactive materials: In vitro investigation of different mech-anisms of hydroxyapatite precipitation, Acta Biomaterialia 102 (2020) 468-480.

J. Massera, 10 - Bioactive glass-ceramics: From macro to nano, in: V. Gua-rino, M. Iafisco, S. Spriano (Eds.), Nanostructured Biomaterials for Regenerative Medicine, Woodhead Publishing, London, 2020, pp. 275-292.

A. Diez-Escudero, M. Espanol, M.-P. Ginebra, Chapter 5 - Synthetic bone graft substitutes: Calcium-based biomaterials, in: H. Alghamdi, J. Jansen (Eds.), Dental Implants and Bone Grafts, Woodhead Publishing, London, 2020, pp. 125-157.

M. Manzano, M. Vallet-Regí, Mesoporous Silica Nanoparticles for Drug De-livery, Advanced Functional Materials 30(2) (2020) 1902634.

I. Cacciotti, M. Lombardi, A. Bianco, A. Ravaglioli, L. Montanaro, Sol–gel derived 45S5 bioglass: synthesis, microstructural evolution and thermal behaviour, Journal of Materials Science: Materials in Medicine 23(8) (2012) 1849-1866.

K. Dimitriadis, D. Moschovas, D.U. Tulyaganov, S. Agathopoulos, Develop-ment of novel bioactive glass-ceramics in the Na2O/K2O-CaO-MgO-SiO2-P2O5-CaF2 system, Journal of Non-Crystalline Solids 533 (2020) 119936.

O. Rojas, M. Prudent, M.E. López, F. Vargas, H. Ageorges, Influence of At-mospheric Plasma Spraying Parameters on Porosity Formation in Coatings Man-ufactured from 45S5 Bioglass® powder, Journal of Thermal Spray Technology 29(1) (2020) 185-198.

P. Eshghinejad, H. Farnoush, M.S. Bahrami, H.R. Bakhsheshi-Rad, E. Karamian, X.B. Chen, Electrophoretic deposition of bioglass/graphene oxide com-posite on Ti-alloy implants for improved antibacterial and cytocompatible proper-ties, Materials Technology 35(2) (2020) 69-74.

C. Gao, T. Liu, C. Shuai, S. Peng, Enhancement mechanisms of graphene in nano-58S bioactive glass scaffold: mechanical and biological performance, Scientific Reports 4(1) (2014) 4712.

M. Plewinski, K. Schickle, M. Lindner, A. Kirsten, M. Weber, H. Fischer, The effect of crystallization of bioactive bioglass 45S5 on apatite formation and degradation, Dental Materials 29(12) (2013) 1256-1264.

M. Arango-Ospina, Q. Nawaz, A.R. Boccaccini, 9 - Silicate-based nanoc-eramics in regenerative medicine, in: V. Guarino, M. Iafisco, S. Spriano (Eds.), Nanostructured Biomaterials for Regenerative Medicine, Woodhead Publishing, London, 2020, pp. 255-273.

Q. Yao, H. Liu, X. Lin, L. Ma, X. Zheng, Y. Liu, P. Huang, S. Yu, W. Zhang, M. Lin, L. Dai, Y. Liu, 3D Interpenetrated Graphene Foam/58S Bioactive Glass Scaffolds for Electrical-Stimulation-Assisted Differentiation of Rabbit Mesenchy-mal Stem Cells to Enhance Bone Regeneration, Journal of Biomedical Nanotech-nology 15(3) (2019) 602-611.

A.K. Singh, K. Pramanik, A. Biswas, MgO enables enhanced bioactivity and antimicrobial activity of nano bioglass for bone tissue engineering application, Materials Technology 34(13) (2019) 818-826.

N. Karimi, M. Kharaziha, K. Raeissi, Electrophoretic deposition of chitosan reinforced graphene oxide-hydroxyapatite on the anodized titanium to improve bi-ological and electrochemical characteristics, Materials Science and Engineering: C 98 (2019) 140-152.

H. Mokhtari, Z. Ghasemi, M. Kharaziha, F. Karimzadeh, F. Alihosseini, Chi-tosan-58S bioactive glass nanocomposite coatings on TiO2 nanotube: Structural and biological properties, Applied Surface Science 441 (2018) 138-149.

M. Haftbaradaran-Esfahani, M. Ahmadian, A.H. Nassajpour-Esfahani, Fabri-cation and characterization of porous biomedical Vitallium alloy with 58S bioglass coating prepared by sol-gel method, Applied Surface Science 506 (2020) 144959.

J. Faure, R. Drevet, A. Lemelle, N.B. Jaber, A. Tara, H. El Btaouri, H. Ben-hayoune, A new sol–gel synthesis of 45S5 bioactive glass using an organic acid as catalyst, Materials Science and Engineering: C 47 (2015) 407-412.

X.V. Bui, T.H. Dang, Bioactive glass 58S prepared using an innovation sol-gel process, Processing and Application of Ceramics 13(1) (2019) 98-103.

G. Kaur, V. Kumar, F. Baino, J.C. Mauro, G. Pickrell, I. Evans, O. Bretcanu, Mechanical properties of bioactive glasses, ceramics, glass-ceramics and compos-ites: State-of-the-art review and future challenges, Materials Science and Engineering: C 104 (2019) 109895.

K.C.R. Kolan, J.A. Semon, A.T. Bindbeutel, D.E. Day, M.C. Leu, Bioprint-ing with bioactive glass loaded polylactic acid composite and human adipose stem cells, Bioprinting 18 (2020) e00075.

M.N. Gómez-Cerezo, D. Lozano, D. Arcos, M. Vallet-Regí, C. Vaquette, The effect of biomimetic mineralization of 3D-printed mesoporous bioglass scaffolds on physical properties and in vitro osteogenicity, Materials Science and Engineer-ing: C 109 (2020) 110572.

H.A. Abo-Mosallam, E.A. Mahdy, The influence of MgO on the crystallization behaviour and properties of SrO-rich phosphosilicate glasses, Ceramics International 46(8, Part B) (2020) 12009-12014.

I. Farooq, S. Ali, S. Husain, E. Khan, R.G. Hill, 17 - Bioactive glasses—structure and applications, in: Z. Khurshid, S. Najeeb, M.S. Zafar, F. Sefat (Eds.), Advanced Dental Biomaterials, Woodhead Publishing, London, 2019, pp. 453-476.

M. Chavali, P. Palanisamy, M.P. Nikolova, R.-J. Wu, R. Tadiboyina, P.T.S.R.K. Prasada Rao, Chapter 2 - Inorganic composites in biomedical engineer-ing, in: V. Grumezescu, A.M. Grumezescu (Eds.), Materials for Biomedical Engi-neering, Elsevier, USA, 2019, pp. 47-80.

E. Villicaña-Molina, E.A. Aguilar-Reyes, C.A. León-Patiño, R.E. Nuñez-Anita, Preparation of CEL2 glass-ceramic porous scaffolds coated with chitosan microspheres that have a drug delivery function, International Journal of Applied Ceramic Technology 16(5) (2019) 1812-1822.

B. Zhang, J. Huang, R. Narayan, 3 - Nanostructured biomaterials for re-generative medicine: Clinical perspectives, in: V. Guarino, M. Iafisco, S. Spriano (Eds.), Nanostructured Biomaterials for Regenerative Medicine, Woodhead Publishing, London, 2020, pp. 47-80.

C. Domínguez-Trujillo, F. Ternero, J.A. Rodríguez-Ortiz, S. Heise, A.R. Boccaccini, J. Lebrato, Y. Torres, Bioactive coatings on porous titanium for bio-medical applications, Surface and Coatings Technology 349 (2018) 584-592.

D. Faria, J.M. Pires, A.R. Boccaccini, O. Carvalho, F.S. Silva, J. Mesqui-ta-Guimarães, Development of novel zirconia implant’s materials gradated design with improved bioactive surface, Journal of the Mechanical Behavior of Biomedi-cal Materials 94 (2019) 110-125.

S. Mandal, S. Meininger, U. Gbureck, B. Basu, 3D powder printed tetracal-cium phosphate scaffold with phytic acid binder: fabrication, microstructure and in situ X-Ray tomography analysis of compressive failure, Journal of Materials Science: Materials in Medicine 29(3) (2018) 29.

M. Ganjali, A. Yazdanpanah, M. Mozafari, Chapter 8 - Laser deposition of nano coatings on biomedical implants, in: A. Barhoum, A.S.H. Makhlouf (Eds.), Emerging Applications of Nanoparticles and Architecture Nanostructures, Elsevier2018,USA, pp. 235-254.

F. Baino, M.A. Montealegre, G. Orlygsson, G. Novajra, C. Vitale-Brovarone, Bioactive glass coatings fabricated by laser cladding on ceramic acetabular cups: A proof-of-concept study, Journal of Materials Science 52(15) (2017) 9115-9128.

Q. Wu, M.L. Mei, X. Wu, S. Shi, Y. Xu, C.H. Chu, Y. Chen, Remineralising effect of 45S5 bioactive glass on artificial caries in dentine, BMC Oral Health 20(1) (2020) 49.

E. Marin, T. Adachi, M. Zanocco, F. Boschetto, A. Rondinella, W. Zhu, S. Somekawa, R. Ashida, R.M. Bock, B.J. McEntire, B.S. Bal, O. Mazda, G. Pezzotti, Enhanced bioactivity of Si3N4 through trench-patterning and back-filling with Bioglass®, Materials Science and Engineering: C 106 (2020) 110278.

F. Baino, J. Minguella-Canela, F. Korkusuz, P. Korkusuz, B. Kank?l?ç, M.Á. Montealegre, D. los Santos-López, M. Antonia, C. Vitale-Brovarone, In vitro as-sessment of bioactive glass coatings on alumina/zirconia composite implants for potential use in prosthetic applications, International journal of molecular sciences 20(3) (2019) 722.

M.Á. Montealegre, F. Baino, J.L. Arias, J. Minguella, C. Vitale-Brovarone, M. Marshall, Bioactive glass coatings on Al2O3-ZrO2 composite substrates by laser cladding for orthopaedic applications, International Congress on Applications of Lasers & Electro-Optics, Laser Institute of America,USA, 2013, pp. 43-49.

F. Foroutan, B.A. Kyffin, I. Abrahams, A. Corrias, P. Gupta, E. Velliou, J.C. Knowles, D. Carta, Mesoporous Phosphate-Based Glasses Prepared via Sol–Gel, ACS Biomaterials Science & Engineering 6(3) (2020) 1428-1437.

A. Anand, P. Das, S.K. Nandi, B. Kundu, Development of antibiotic loaded mesoporous bioactive glass and its drug release kinetics, Ceramics International 46(4) (2020) 5477-5483.

F. Iqbal, H. Fatima, 14 - Coating of hydroxyapatite and substituted apatite on dental and orthopedic implants, in: A.S. Khan, A.A. Chaudhry (Eds.), Handbook of Ionic Substituted Hydroxyapatites, Woodhead Publishing, London, 2020, pp. 327-353.

A. Nasar, Hydroxyapatite and its coatings in dental implants, Applications of Nanocomposite Materials in Dentistry, Elsevier, USA, 2019, pp. 145-160.

P. Ning, F. Zhang, L.J. Wang, Y. Zhou, Y.J. Wang, Y.Y. Wu, T. Fu, Sol-gel de-rived AgMgO films for antibacterial and bioactive surface modification of niobium metal, Materials Chemistry and Physics 243 (2020) 122646.

B. Liu, G.-y. Xiao, C.-z. Chen, Y.-p. Lu, X.-w. Geng, Hopeite and scholzite coatings formation on titanium via wet-chemical conversion with controlled tem-perature, Surface and Coatings Technology 384 (2020) 125330.

J.R. Martínez, D. Espericueta, G. Guerrero-Serrano, G. Ortega-Zarzosa, E. Espericueta, A.L. Guerrero, Stabilization of ?-carotene embedded in a silica matrix and study of its physical properties, Materials Research Express 7(1) (2020) 015205.

E.B. Fredj, S. Rousselot, L. Danis, T. Bibienne, M. Gauthier, G. Liang, M. Dollé, Synthesis and characterization of LiFe1?xMnxPO4 (x = 0.25, 0.50, 0.75) lithium ion battery cathode synthesized via a melting process, Journal of Energy Storage 27 (2020) 101116.

X. Xu, Y. Pan, L. Ge, Z. Shao, Perovskite Materials in Electrocatalysis, in: N.S. Arul, V.D. Nithya (Eds.), Revolution of Perovskite: Synthesis, Properties and Applications, Springer Singapore, Singapore, 2020, pp. 209-250.

D.S. Raghav, S. Kumari, H.K. Singh, G.D. Varma, Structure, magnetism and electrical transport of sol-gel derived La0.30Pr0.30Ca0.40MnO3: Elucidating consequences of size effect, Journal of Magnetism and Magnetic Materials 497 (2020) 166003.

N.O. Joy-anne, Y. Su, X. Lu, P.-H. Kuo, J. Du, D. Zhu, Bioactive glass coat-ings on metallic implants for biomedical applications, Bioactive materials 4 (2019) 261-270.

J. Mesquita-Guimarães, L. Ramos, R. Detsch, B. Henriques, M. Fredel, F. Silva, A. Boccaccini, Evaluation of in vitro properties of 3D micro-macro porous zirconia scaffolds coated with 58S bioactive glass using MG-63 osteoblast-like cells, Journal of the European Ceramic Society 39(7) (2019) 2545-2558.

F. Lin, C. Yan, W. Zheng, W. Fan, C. Adam, A. Oloyede, Preparation of mes-oporous bioglass coated zirconia scaffold for bone tissue engineering, Advanced Materials Research, Trans Tech Publ, Switzerland, 2012, pp. 209-215.

M. Faustini, B. Louis, P.A. Albouy, M. Kuemmel, D. Grosso, Preparation of sol? gel films by dip-coating in extreme conditions, The Journal of Physical Chemistry C 114(17) (2010) 7637-7645.

A. Cattini, L. ?atka, D. Bellucci, G. Bolelli, A. Sola, L. Lusvarghi, L. Paw?owski, V. Cannillo, Suspension plasma sprayed bioactive glass coatings: Effects of processing on microstructure, mechanical properties and in-vitro be-haviour, Surface and Coatings Technology 220 (2013) 52-59.

V.L. Calvo, M.V. Cabedo, E. Bannier, E.C. Recacha, A.R. Boccaccini, L.C. Arias, E.S. Vilches, 45S5 bioactive glass coatings by atmospheric plasma spraying obtained from feedstocks prepared by different routes, Journal of Materials Sci-ence 49(23) (2014) 7933-7942.

A. Joulia, G. Bolelli, E. Gualtieri, L. Lusvarghi, S. Valeri, M. Vardelle, S. Rossignol, A. Vardelle, Comparing the deposition mechanisms in suspension plasma spray (SPS) and solution precursor plasma spray (SPPS) deposition of yt-tria-stabilised zirconia (YSZ), Journal of the European Ceramic Society 34(15) (2014) 3925-3940.

M.R. Syed, M. Khan, F. Sefat, Z. Khurshid, M.S. Zafar, A.S. Khan, Chapter 17 - Bioactive Glass and Glass Fiber Composite: Biomedical/Dental Applications, in: G. Kaur (Ed.), Biomedical, Therapeutic and Clinical Applications of Bioactive Glasses, Woodhead Publishing, London, 2019, pp. 467-495.

F. Baino, Chapter 16 - Functionally Graded Bioactive Glass-Derived Scaf-folds Mimicking Bone Tissue, in: G. Kaur (Ed.), Biomedical, Therapeutic and Clinical Applications of Bioactive Glasses, Woodhead Publishing, London, 2019, pp. 443-466.

J. Chang, Y.L. Zhou, 6 - Surface modification of bioactive glasses, in: H. Ylänen (Ed.), Bioactive Glasses (Second Edition), Woodhead Publishing, London, 2018, pp. 119-143.

Article DOR: 20.1001.1.26765837.2020.2.2.2.0