An overview of materials, processing, and applications for wearable electronics en en Wearable electronics are gaining widespread attention because of the potential applications of them in systems of wearable human care and health monitoring. These new devices are probably a collection of different appli-cations like batteries, sensors, displays, and so on. In these respects, conductive fibers, inks, and fabrics were examined. On the field, three materials categories including carbon, metal, and polymer-based materials were investigated. Materials of carbon have advantages like good electrical conductivity, structural and inherent flex-ibility, high thermal and chemical stability, light weight, ease of chemical operation, and potential production of mass, enabling them to be a good candidate for wearable and flexible electronics. Conducting polymers have a number of drawbacks in their natural state; however, by combining them with other materials, these drawbacks can be solved. Conducting polymer composites have a wide range of applications in optoelectronic, electronic, and electrical sectors due to their synergetic effects. Liquid metal was bestowed with new-emerging characteristics and multifunctional applications. Due to the high surface tension and limited adherence on many surfaces, the manufacturing approach of patterning liquid metals on flexible substrates has received a lot of attention up to now. The current state of wearable materials as actuators and fabrication processes are discussed in this review paper. 275 290 Mohammad Yusuf Department of Chemical Engineering Universiti Teknologi PETRONAS Malaysia info@jourcc.com Sara Eskandarinezhad Department of Mining and Metallurgy Yazd University Iran s.eskandari.nezhad@gmail.com Wearable electronics Conductive fibers Sensors Conductive fabrics Fabrication methods Article7.pdf [1] J.S. Heo, J. Eom, Y.H. Kim, S.K. Park, Recent progress of textile‐based wearable electronics: a compre-hensive review of materials, devices, and applications, Small 14(3) (2018) 1703034. ## [2] C. Wang, K. Xia, H. Wang, X. Liang, Z. Yin, Y. Zhang, Advanced carbon for flexible and wearable electronics, Advanced mate-rials 31(9) (2019) 1801072. ## [3] S. Gong, W. Cheng, One‐dimensional nanomaterials for soft electronics, Advanced Electronic Materials 3(3) (2017) 1600314. ## [4] S. Yao, P. Swetha, Y. Zhu, Nanomaterial-enabled wearable sensors for healthcare. Adv Healthc Mater 7: 1700889, 2018. ## [5] J. Ran, R. Xu, R. Xia, D. Cheng, J. Yao, S. Bi, G. Cai, X. Wang, Carbon nanotube/polyurethane core–sheath nanocomposite fibers for wearable strain sensors and electro-thermochromic textiles, Smart Materials and Structures 30(7) (2021) 075022. ## [6] K. Chen, W. Gao, S. Emaminejad, D. Kiriya, H. Ota, H.Y.Y. Nyein, K. Takei, A. Javey, Printed carbon nano-tube electronics and sensor systems, Advanced Materials 28(22) (2016) 4397-4414. ## [7] H. Jang, Y.J. Park, X. Chen, T. Das, M.S. Kim, J.H. Ahn, Graphene‐based flexible and stretchable electronics, Advanced Materi-als 28(22) (2016) 4184-4202. ## [8] Y.W. Lim, J. Jin, B.S. Bae, Optically transparent multiscale composite films for flexible and wearable electronics, Advanced Materials 32(35) (2020) 1907143. ## [9] J.C. Gerdeen, H.W. Lord, R.A. Rorrer, Engineering Design with Polymers and Composites, (2005). ## [10] T. Sathishkumar, S. Satheeshkumar, J. Naveen, Glass fiber-reinforced polymer composites–a review, Journal of reinforced plas-tics and composites 33(13) (2014) 1258-1275. ## [11] K. Zhou, Y. Zhao, X. Sun, Z. Yuan, G. Zheng, K. Dai, L. Mi, C. Pan, C. Liu, C. Shen, Ultra-stretchable triboelectric nanogenerator as high-sensitive and self-powered electronic skins for energy harvesting and tactile sensing, Nano Energy 70 (2020) 104546. ## [12] R. Guo, H. Wang, X. Sun, S. Yao, H. Chang, H. Wang, J. Liu, Y. Zhang, Semiliquid Metal Enabled Highly Conductive Wearable Electronics for Smart Fabrics, ACS Applied Materials and Interfaces 11(33) (2019) 30019-30027. ## [13] X. Ding, Y. Zhao, C. Hu, Y. Hu, Z. Dong, N. Chen, Z. Zhang, L. Qu, Spinning fabrication of gra-phene/polypyrrole composite fibers for all-solid-state, flexible fibriform supercapacitors, Journal of Materials Chemistry A 2(31) (2014) 12355-12360. ## [14] D. Saidina, N. Eawwiboonthanakit, M. Mariatti, S. Fontana, C. Hérold, Recent Development of Graphene-Based Ink and Other Conductive Material-Based Inks for Flexi-ble Electronics, Journal of Electronic Materials 48(6) (2019). ## [15] A. Reyes Jiménez, R. Klöpsch, R. Wag-ner, U.C. Rodehorst, M. Kolek, R. Nölle, M. Winter, T. Placke, A step toward high-energy silicon-based thin film lithium ion batteries, ACS nano 11(5) (2017) 4731-4744. ## [16] M.A. Alam, M.H. Asoushe, P. Pourhak-kak, L. Gritsch, A. Alipour, S. Mohammadi, Preparation of bioactive polymer-based composite by different techniques and application in tissue engineering: A review, Journal of Composites and Compounds 3(8) (2021) 194-205. ## [17] K. Chen, J. Ren, C. Chen, W. Xu, S. Zhang, Safety and effectiveness evaluation of flexible electronic materials for next generation wearable and implantable medical devices, Nano Today 35 (2020) 100939. ## [18] A. Lamberti, A. Sacco, M. Laurenti, M. Fontana, C. Pirri, S. Bianco, Sponge-like ZnO nanostructures by low temperature water vapor-oxidation method as dye-sensitized solar cell photoanodes, Journal of alloys and compounds 615 (2014) S487-S490. ## [19] A. Lamberti, A. Chiodoni, N. Shahzad, S. Bianco, M. Quaglio, C.F. Pirri, Ultrafast room-temperature crystallization of TiO2 nanotubes exploiting wa-ter-vapor treatment, Scientific reports 5(1) (2015) 1-6. ## [20] W.K. Tan, K.A. Razak, Z. Lockman, G. Kawa-mura, H. Muto, A. Matsuda, Formation of highly crystallized ZnO nanostructures by hot-water treatment of etched Zn foils, Materials Letters 91 (2013) 111-114. ## [21] N.S. Saadi, L.B. Hassan, T. Karabacak, Metal oxide nanostructures by a simple hot water treatment, Scientific reports 7(1) (2017) 1-8. ## [22] G. Chen, Y. Ai, I.T. Mugaanire, W. Ma, B.S. Hsiao, K. Hou, M. Zhu, A simple inorganic hybrids strategy for graphene fi-bers fabrication with excellent electrochemical performance, Journal of Power Sources 450 (2020) 227637. ## [23] L. Jin, T. Sun, W. Zhao, L. Wang, W. Jiang, Durable and washable carbon nanotube-based fibers toward wearable thermoelectric generators application, Journal of Power Sources 496 (2021) 229838. ## [24] P. Fei, P.-H. Yeh, J. Zhou, S. Xu, Y. Gao, J. Song, Y. Gu, Y. Huang, Z.L. Wang, Piezoelectric potential gated field-effect transistor based on a free-standing ZnO wire, Nano letters 9(10) (2009) 3435-3439. ## [25] L. Vallozzi, P. Van Torre, C. Hertleer, H. Rogier, M. Moeneclaey, J. Verhaevert, Wireless communication for firefighters using dual-polarized textile antennas integrated in their garment, IEEE Transactions on Antennas and Propa-gation 58(4) (2010) 1357-1368. ## [26] G. Prunet, F. Pawula, G. Fleury, E. Cloutet, A.J. Robinson, G. Hadzii-oannou, A. Pakdel, A review on conductive polymers and their hybrids for flexible and wearable thermoelec-tric applications, Materials Today Physics 18 (2021) 100402. ## [27] W.S. Garcia, Advanced Organic Poly-mers for the Nanoscale Fabrication of Fiber-Based Electronics Using the Electrospinning Technique, Univer-sity of South Florida, 2021. ## [28] Z. Yang, Z. Zhai, Z. Song, Y. Wu, J. Liang, Y. Shan, J. Zheng, H. Liang, H. Jiang, Conductive and Elastic 3D Helical Fibers for Use in Washable and Wearable Electronics, Advanced Materials 32(10) (2020) 1907495. ## [29] P.K. Brown, A.T. Qureshi, A.N. Moll, D.J. Hayes, W.T. Monroe, Silver nanoscale antisense drug delivery system for photoactivated gene silencing, ACS nano 7(4) (2013) 2948-2959. ## [30] C. Vietz, I. Kaminska, M. Sanz Paz, P. Tinnefeld, G.P. Acuna, Broadband fluorescence en-hancement with self-assembled silver nanoparticle optical antennas, ACS nano 11(5) (2017) 4969-4975. ## [31] K. Nesrin, C. Yusuf, K. Ahmet, S.B. Ali, N.A. Muhammad, S. Suna, Ş. Fatih, Biogenic silver nanoparti-cles synthesized from Rhododendron ponticum and their antibacterial, antibiofilm and cytotoxic activities, Journal of pharmaceutical and biomedical analysis 179 (2020) 112993. ## [32] B. Shi, T. Wang, L. Shi, J. Li, R. Wang, J. Sun, Highly stretchable and strain sensitive fibers based on braid-like structure and sliver nan-owires, Applied Materials Today 19 (2020) 100610. ## [33] A. Esmaeilkhanian, F. Sharifianjazi, N. Parvin, M.A. Kooti, Cytotoxicity of thermoresponsive core/shell Ni x Co1− x Fe2O4/PEG nanoparticles synthesized by the sol–gel method, Journal of Physics D: Applied Physics 54(29) (2021) 295002. ## [34] M.D. Lima, S. Fang, X. Lepró, C. Lewis, R. Ovalle-Robles, J. Carretero-González, E. Castillo-Martínez, M.E. Kozlov, J. Oh, N. Rawat, Biscrolling nanotube sheets and functional guests into yarns, Science 331(6013) (2011) 51-55. ## [35] Y.G. Li, D. Lu, C. Wong, Electrical conductive adhesives with nanotechnologies, Springer Science and Business Media 2009. ## [36] J. Gao, J. Luo, L. Wang, X. Huang, H. Wang, X. Song, M. Hu, L.-C. Tang, H. Xue, Flexible, superhydrophobic and highly conductive composite based on non-woven polypropylene fabric for electromagnetic interference shielding, Chemical Engineering Journal 364 (2019) 493-502. ## [37] L.C. Jia, K.Q. Ding, R.J. Ma, H.L. Wang, W.J. Sun, D.X. Yan, B. Li, Z.M. Li, Highly Conductive and Machine‐Washable Textiles for Efficient Electromagnetic Interference Shielding, Advanced Materials Technologies 4(2) (2019) 1800503. ## [38] M. Arefian, M. Hojjati, I. Tajzad, A. Mokhtarzade, M. Mazhar, A. Jamavari, A review of Polyvinyl alcohol/Carboxymethyl cellulose (PVA/CMC) composites for various applications, Jour-nal of Composites and Compounds 2(3) (2020) 69-76. ## [39] C. Lan, C. Li, J. Hu, S. Yang, Y. Qiu, Y. Ma, High‐Loading Carbon Nanotube/Polymer Nanocomposite Fabric Coatings Obtained by Capillarity‐Assisted “Excess Assembly” for Electromagnetic Interference Shielding, Advanced Materials Interfaces 5(13) (2018) 1800116. ## [40] K. Sreeja Sadanandan, A. Bacon, D.-W. Shin, S.F.R. Alkhalifa, S. Russo, M.F. Craciun, A.I.S. Neves, Graphene coated fabrics by ultrasonic spray coating for wearable electronics and smart textiles, Journal of Physics: Materials 4(1) (2020) 014004. ## [41] Z. Guo, J. Zhao, C. Sun, Z. Cai, F. Ge, Flexible self-standing carbon fabric electrode prepared by using simple route for wearable applications, Journal of Materi-als Science: Materials in Electronics 31(2) (2020) 1554-1565. ## [42] A. Pullanchiyodan, L. Manjakkal, R. Dahiya, Metal Coated Fabric Based Asymmetric Supercapacitor for Wearable Applications, IEEE Sensors Journal (2021). ## [43] L.X. Liu, W. Chen, H.B. Zhang, Q.W. Wang, F. Guan, Z.Z. Yu, Flexible and multi-functional silk textiles with biomimetic leaf‐like MXene/silver nanowire nanostructures for electromagnetic interference shielding, humidity monitoring, and self‐derived hydrophobicity, Advanced Functional Materials 29(44) (2019) 1905197. ## [44] A. Ali, V. Baheti, M. Vik, J. Militky, Copper electroless plating of cotton fab-rics after surface activation with deposition of silver and copper nanoparticles, Journal of Physics and Chem-istry of Solids 137 (2020) 109181. ## [45] Y. Zhou, S.H. Yu, C.Y. Wang, X.G. Li, Y.R. Zhu, Z.Y. Chen, A novel ultraviolet irradiation photoreduction technique for the preparation of single‐crystal Ag nanorods and Ag dendrites, Advanced Materials 11(10) (1999) 850-852. ## [46] M. Mazur, Electrochemically prepared sil-ver nanoflakes and nanowires, Electrochemistry Communications 6(4) (2004) 400-403. ## [47] S. Zou, C. Wang, Q. Gao, Z. Tong, Surfactant-free multiple pickering emulsions stabilized by combining hydrophobic and hydrophilic nanoparticles, Journal of dispersion science and technology 34(2) (2013) 173-181. ## [48] H. Sun, S. Xie, Y. Li, Y. Jiang, X. Sun, B. Wang, H. Peng, Large‐Area Supercapacitor Textiles with Novel Hier-archical Conducting Structures, Advanced Materials 28(38) (2016) 8431-8438. ## [49] L. Zhang, Z. Wang, J.L. Volakis, Textile antennas and sensors for body-worn applications, IEEE Antennas and Wireless Propaga-tion Letters 11 (2012) 1690-1693. ## [50] A. Strålin, T. Hjertbergc, Improved adhesion strength between alu-minum and ethylene copolymers by hydration of the aluminum surface, Journal of applied polymer science 49(3) (1993) 511-521. ## [51] S. Xu, Y. Zhang, J. Cho, J. Lee, X. Huang, L. Jia, J.A. Fan, Y. Su, J. Su, H. Zhang, Stretchable batteries with self-similar serpentine interconnects and integrated wireless recharging sys-tems, Nature communications 4(1) (2013) 1-8. ## [52] H. Li, J. Liang, Recent development of printed micro‐supercapacitors: printable materials, printing technologies, and perspectives, Advanced Materials 32(3) (2020) 1805864. ## [53] Z. Xu, H. Sun, X. Zhao, C. Gao, Ultrastrong fibers assembled from giant graphene oxide sheets, Advanced Materials 25(2) (2013) 188-193. ## [54] M. Salah, P. Murphy, C. Hall, C. Francis, R. Kerr, M. Fabretto, Pure silicon thin-film anodes for lithium-ion batteries: A review, Journal of Power Sources 414 (2019) 48-67. ## [55] R.G. Kelly, J.R. Scully, D. Shoesmith, R.G. Buchheit, Electrochemical techniques in corrosion science and engineering, CRC Press2002. ## [56] L. Bazli, S. Eskandarinezhad, N. Kakur, V. Ra-machandran, A. Bacigalupe, M. Mansilla, M. Escobar, Electrical properties of polymer blend composites based on Silicone rubber/EPDM/clay for high voltage insulators, Journal of Composites and Compounds 3(6) (2021) 18-24. ## [57] S.H. Kim, B.S. Choi, K. Kang, Y.-S. Choi, S.I. Yang, Low temperature synthesis and growth mechanism of Ag nanowires, Journal of Alloys and Compounds 433(1-2) (2007) 261-264. ## [58] S. Wu, P. Liu, Y. Zhang, H. Zhang, X. Qin, Flexible and conductive nanofiber-structured single yarn sensor for smart wearable devices, Sensors and Actuators B: Chemical 252 (2017) 697-705. ## [59] J. Lee, H. Kwon, J. Seo, S. Shin, J.H. Koo, C. Pang, S. Son, J.H. Kim, Y.H. Jang, D.E. Kim, Sensors: conductive fiber‐based ultra-sensitive textile pressure sensor for wearable electronics, Advanced Materials 27(15) (2015) 2409-2409. ## [60] Y. Cheng, H. Zhang, R. Wang, X. Wang, H. Zhai, T. Wang, Q. Jin, J. Sun, Highly stretchable and conduc-tive copper nanowire based fibers with hierarchical structure for wearable heaters, ACS applied materials and interfaces 8(48) (2016) 32925-32933. ## [61] S. Vivekchand, C.S. Rout, K. Subrahmanyam, A. Govindaraj, C. Rao, Graphene-based electrochemical supercapacitors, Journal of Chemical Sciences 120(1) (2008) 9-13. ## [62] J.J. Yoo, K. Balakrishnan, J. Huang, V. Meunier, B.G. Sumpter, A. Srivastava, M. Conway, A.L. Mohana Reddy, J. Yu, R. Vajtai, Ultrathin planar graphene supercapacitors, Nano letters 11(4) (2011) 1423-1427. ## [63] H. Lu, L. Zhuang, R.R. Gaddam, X. Sun, C. Xiao, T. Duignan, Z. Zhu, X. Zhao, Microcrystalline cellu-lose-derived porous carbons with defective sites for electrochemical applications, Journal of Materials Chem-istry A 7(39) (2019) 22579-22587. ## [64] W. Qian, F. Sun, Y. Xu, L. Qiu, C. Liu, S. Wang, F. Yan, Human hair-derived carbon flakes for electrochemical supercapacitors, Energy and Environmental Science 7(1) (2014) 379-386. ## [65] L.F. Chen, Z.H. Huang, H.W. Liang, H.L. Gao, S.H. Yu, Three‐dimensional heteroa-tom‐doped carbon nanofiber networks derived from bacterial cellulose for supercapacitors, Advanced Func-tional Materials 24(32) (2014) 5104-5111. ## [66] L. Bazli, M. Yusuf, A. Farahani, M. Kiamarzi, Z. Seyedhosseini, M. Nezhadmansari, M. Aliasghari, M. Iranpoor, Application of composite conducting poly-mers for improving the corrosion behavior of various substrates: A Review, Journal of Composites and Com-pounds 2(5) (2020) 228-240. ## [67] C. Guan, W. Zhao, Y. Hu, Z. Lai, X. Li, S. Sun, H. Zhang, A.K. Cheeth-am, J. Wang, Cobalt oxide and N-doped carbon nanosheets derived from a single two-dimensional metal–organic framework precursor and their application in flexible asymmetric supercapacitors, Nanoscale Hori-zons 2(2) (2017) 99-105. ## [68] B. Yao, S. Chandrasekaran, J. Zhang, W. Xiao, F. Qian, C. Zhu, E.B. Duoss, C.M. Spadaccini, M.A. Worsley, Y. Li, Efficient 3D printed pseudocapacitive electrodes with ultrahigh MnO2 loading, Joule 3(2) (2019) 459-470. ## [69] Z. Xu, Y. Liu, X. Zhao, L. Peng, H. Sun, Y. Xu, X. Ren, C. Jin, P. Xu, M. Wang, Ultrastiff and strong graphene fibers via full‐scale synergetic defect engineering, Advanced Materials 28(30) (2016) 6449-6456. ## [70] V.N. Ataide, L.F. Mendes, L.I. Gama, W.R. de Araujo, T.R. Paixao, Electrochemical paper-based analytical devices: ten years of development, Analytical Methods 12(8) (2020) 1030-1054. ## [71] E. Noviana, C.P. McCord, K.M. Clark, I. Jang, C.S. Henry, Electrochemical paper-based devices: Sensing approaches and progress toward practical applications, Lab on a Chip 20(1) (2019) 9-34. ## [72] W.J. Paschoalino, S. Kogikoski Jr, J.T. Barragan, J.F. Giarola, L. Cantelli, T.M. Rabelo, T.M. Pessanha, L.T. Kubota, Emerging considerations for the future development of electrochemical paper-based analytical devices, ChemElectroChem 6(1) (2019) 10-30. ## [73] Y. Yang, E. Noviana, M.P. Nguyen, B.J. Geiss, D.S. Dandy, C.S. Henry, based microfluidic devices: Emerging themes and applications, Analytical chemistry 89(1) (2017) 71-91. ## [74] L.A. Pradela-Filho, E. Noviana, D.A. Araújo, R.M. Takeuchi, A.L. San-tos, C.S. Henry, Rapid analysis in continuous-flow electrochemical paper-based analytical devices, ACS sen-sors 5(1) (2020) 274-281. ## [75] I.A. de Araujo Andreotti, L.O. Orzari, J.R. Camargo, R.C. Faria, L.H. Mar-colino-Junior, M.F. Bergamini, A. Gatti, B.C. Janegitz, Disposable and flexible electrochemical sensor made by recyclable material and low cost conductive ink, Journal of Electroanalytical Chemistry 840 (2019) 109-116. ## [76] L.A. Pradela-Filho, I.A. Andreotti, J.H. Carvalho, D.A. Araujo, L.O. Orzari, A. Gatti, R.M. Takeuchi, A.L. Santos, B.C. Janegitz, Glass varnish-based carbon conductive ink: A new way to produce dis-posable electrochemical sensors, Sensors and Actuators B: Chemical 305 (2020) 127433. ## [77] W. Wang, H. Bai, H. Li, Q. Lv, Z. Wang, Q. Zhang, Disposable plastic electrode for electrochemical determination of total chromium and hexavalent chromium, Journal of Electroanalytical Chemistry 794 (2017) 148-155. ## [78] S. Hassanpour, M. Hasanzadeh, A. Saadati, N. Shadjou, J. Soleymani, A. Jouyban, A novel paper based immuno-assay of breast cancer specific carbohydrate (CA 15.3) using silver nanoparticles-reduced graphene oxide nano-ink technology: A new platform to construction of microfluidic paper-based analytical devices (μPADs) towards biomedical analysis, Microchemical Journal 146 (2019) 345-358. ## [79] T.S. Tran, N.K. Dutta, N.R. Choudhury, Graphene inks for printed flexible electronics: graphene dispersions, ink formulations, printing techniques and applications, Advances in colloid and interface science 261 (2018) 41-61. ## [80] Y. Xu, K. Sheng, C. Li, G. Shi, Self-assembled graphene hydrogel via a one-step hydrothermal process, ACS nano 4(7) (2010) 4324-4330. ## [81] A. Goldstein, Handbook of nanophase materials, CRC Press1997. ## [82] B. Bhu-shan, Springer Handbook of Nanotechnology, Columbus: Springer-Verlag. p 618 (1964). ## [83] V.T. Liveri, Controlled synthesis of nanoparticles in microheterogeneous systems, Springer Science and Business Me-dia2006. ## [84] M. Valverde-Alva, T. García-Fernández, M. Villagrán-Muniz, C. Sánchez-Aké, R. Castañeda-Guzmán, E. Esparza-Alegría, C. Sánchez-Valdés, J.S. Llamazares, C.M. Herrera, Synthesis of sil-ver nanoparticles by laser ablation in ethanol: A pulsed photoacoustic study, Applied Surface Science 355 (2015) 341-349. ## [85] J. Daraei, Production and characterization of PCL (Polycaprolactone) coated TCP/nanoBG composite scaffolds by sponge foam method for orthopedic applications, Journal of Composites and Compounds 2(2) (2020) 44-49. ## [86] S.M. Prokes, K.L. Wang, Novel methods of nanoscale wire for-mation, Mrs Bulletin 24(8) (1999) 13-19. ## [87] H. Khalilpour, P. Shafiee, A. Darbandi, M. Yusuf, S. Mahmoudi, Z.M. Goudarzi, S. Mirzamohammadi, Application of Polyoxometalate-based composites for sen-sor systems: A review, Journal of Composites and Compounds 3(7) (2021) 129-139. ## [88] N.R. Jana, L. Gearheart, C.J. Murphy, Wet chemical synthesis of high aspect ratio cylindrical gold nanorods, The Journal of Physical Chemistry B 105(19) (2001) 4065-4067. ## [89] E.M. Santos, F.J.H.T.V. Ramos, P.H.P.M. da Silvei-ra, S.N. Monteiro, A.V. Gomes, Chemical, thermal, and microstructural characterization of polyethylene ter-ephthalate composites reinforced with steel slag geopolymer waste, Journal of Composites and Compounds 3(8) (2021) 164-170. ## [90] S. Coskun, B. Aksoy, H.E. Unalan, Polyol synthesis of silver nanowires: an ex-tensive parametric study, Crystal Growth and Design 11(11) (2011) 4963-4969. ## [91] A.J.M. Fariborz Shar-ifianjazi Amirhossein Moghanian, Jalalian, Synthesis and characterization of polymer matrix composites rein-forced with sand particles in buildings and highways application, International Conference on Polymer in Construction, Iran University of Science and Technology, Tehran, Iran (2016). ## [92] Z. Yang, H. Qian, H. Chen, J.N. Anker, One-pot hydrothermal synthesis of silver nanowires via citrate reduction, Journal of colloid and interface science 352(2) (2010) 285-291. ## [93] B. Wiley, Y. Sun, B. Mayers, Y. Xia, Shape‐controlled synthesis of metal nanostructures: the case of silver, Chemistry–A European Journal 11(2) (2005) 454-463. ## [94] M.A. Fariborz SharifianJazi Amirhossein Moghanian, Fatemeh Hasan beigi, Alireza Najari, Synthesis and investigation the mechanical properties of PET polymer matrix composite reinforced with SiO2 in civil engineering by TTO model, The 5th National and the 1st International Conference on Modern Materials and Structures in Civil Engineering, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran (2016). ## [95] F. Sharifianjazi, M. Irani, A. Esmaeilkhanian, L. Bazli, M.S. Asl, H.W. Jang, S.Y. Kim, S. Ramakrishna, M. Shokouhimehr, R.S. Varma, Polymer incorporated magnetic nanoparticles: Applications for magnetoresponsive targeted drug delivery, Materials Science and Engineering: B 272 (2021) 115358. ## [96] N. Durán, P.D. Marcato, O.L. Alves, G.I. De Souza, E. Esposito, Mechanistic aspects of biosynthesis of silver nanoparticles by several Fusarium oxysporum strains, Journal of nanobiotechnology 3(1) (2005) 1-7. ## [97] S. Abedini, N. Parvin, P. Ashtari, F. Jazi, Microstructure, strength and CO2 separation characteristics of α-alumina supported γ-alumina thin film membrane, Advances in Applied Ceramics 112(1) (2013) 17-22. ## [98] F.S. Rezaei, F. Sharifianjazi, A. Esmaeilkhanian, E. Salehi, Chitosan films and scaffolds for regenerative medicine applications: A review, Carbohydrate Polymers (2021) 118631. ## [99] A.Y. Yang, R. Jafari, S.S. Sastry, R. Bajcsy, Distributed recognition of human actions using wearable motion sensor networks, Journal of Ambient Intelligence and Smart Environments 1(2) (2009) 103-115. ## [100] C.-C. Hsueh, C.-C. Wu, B.-Y. Chen, Polyphenolic compounds as electron shuttles for sustainable energy utilization, Biotechnology for bio-fuels 12(1) (2019) 1-26. ## [101] R. Francke, R.D. Little, Redox catalysis in organic electrosynthesis: basic principles and recent developments, Chemical Society Reviews 43(8) (2014) 2492-2521. ## [102] J.F. Klemic, E. Stern, M.A. Reed, Hotwiring biosensors, Nature biotechnology 19(10) (2001) 924-925. ## [103] R. Dastjerdi, M.R.M. Mojtahedi, A.M. Shoshtari, A. Khosroshahi, A.J. Moayed, Fiber to fabric processability of silver/zinc-loaded nanocomposite yarns, Textile Research Journal 79(12) (2009) 1099-1107. ## [104] Z. Amini, S.S. Rudsary, S.S. Shahraeini, B.F. Dizaji, P. Goleij, A. Bakhtiari, M. Irani, F. Sharifianjazi, Magnetic bioactive glasses/Cisplatin loaded-chitosan (CS)-grafted-poly (ε-caprolactone) nanofibers against bone cancer treatment, Carbohydrate Polymers 258 (2021) 117680. ## [105] R.L. Wilensky, K.L. March, I. Gradus-Pizlo, D. Schauwecker, M. Michaels, J. Robinson, K. Carlson, D.R. Hathaway, Regional and arterial localization of radioactive microparticles after local delivery by unsupported or supported porous balloon catheters, Ameri-can heart journal 129(5) (1995) 852-859. ## [106] W. Zeng, X.-M. Tao, S. Chen, S. Shang, H.L.W. Chan, S.H. Choy, Highly durable all-fiber nanogenerator for mechanical energy harvesting, Energy and Environmental Science 6(9) (2013) 2631-2638. ## [107] Y.J. Yun, W.G. Hong, W.J. Kim, Y. Jun, B.H. Kim, A novel method for applying reduced graphene oxide directly to electronic textiles from yarns to fabrics, Advanced Materials 25(40) (2013) 5701-5705. ## [108] G.-X. Ni, Y. Zheng, S. Bae, C.Y. Tan, O. Kahya, J. Wu, B.H. Hong, K. Yao, B. Ozyilmaz, Graphene–ferroelectric hybrid structure for flexible transparent electrodes, ACS nano 6(5) (2012) 3935-3942. ## [109] F. Sharifianjazi, A. Esmaeilkhanian, M. Moradi, A. Pakseresht, M.S. Asl, H. Karimi-Maleh, H.W. Jang, M. Shokouhimehr, R.S. Varma, Biocompatibility and mechanical properties of pi-geon bone waste extracted natural nano-hydroxyapatite for bone tissue engineering, Materials Science and Engineering: B 264 (2021) 114950. ## [110] M. Yusuf, A.S. Farooqi, A.A. Al-Kahtani, M. Ubaidullah, M.A. Alam, L.K. Keong, K. Hellgardt, B. Abdullah, Syngas production from greenhouse gases using Ni–W bimetal-lic catalyst via dry methane reforming: Effect of W addition, International Journal of Hydrogen Energy (2021). ## [111] A.J. Granero, P. Wagner, K. Wagner, J.M. Razal, G.G. Wallace, M. in het Panhuis, Highly stretchable conducting SIBS‐P3HT fibers, Advanced Functional Materials 21(5) (2011) 955-962. ## [112] J. Zhu, So, R. Mays, S. Desai, WR Barnes, B. Pourdeyhimi, and M. D. Dickey, Adv. Funct. Mater 23 (2013) 2308. ## [113] M. Yusuf, A.S. Farooqi, M.A. Alam, L.K. Keong, K. Hellgardt, B. Abdullah, Performance of Ni/Al2O3-MgO catalyst for dry reforming of methane: effect of preparation routes, IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2021, p. 012069. ## [114] N. Karim, S. Afroj, A. Malandraki, S. Butterworth, C. Beach, M. Rigout, K.S. Novoselov, A.J. Casson, S.G. Yeates, All inkjet-printed graphene-based conductive patterns for wearable e-textile applications, Journal of materials chemistry C 5(44) (2017) 11640-11648. ## [115] M. Yusuf, A. Farooqi, L. Keong, K. Hellgardt, B. Abdullah, Latest trends in Syngas production employing compound catalysts for methane dry reforming, IOP Conference Series: Ma-terials Science and Engineering, IOP Publishing, 2020, p. 012071. ## [116] E. Singh, M. Meyyappan, H.S. Nalwa, Flexible graphene-based wearable gas and chemical sensors, ACS applied materials and interfaces 9(40) (2017) 34544-34586. ## [117] Y. Yang, Q. Huang, L. Niu, D. Wang, C. Yan, Y. She, Z. Zheng, Water-proof, ultrahigh areal‐capacitance, wearable supercapacitor fabrics, Advanced Materials 29(19) (2017) 1606679. ## [118] V.T. Targhi, H. Omidvar, F. Sharifianjazi, A. Pakseresht, Hot corrosion behavior of alumi-nized and Si-modified aluminized coated IN-738LC produced by a novel hot-dip process, Surfaces and Inter-faces 21 (2020) 100599. ## [119] X. Pu, M. Liu, L. Li, S. Han, X. Li, C. Jiang, C. Du, J. Luo, W. Hu, Z.L. Wang, Wearable textile‐based in‐plane microsupercapacitors, Advanced Energy Materials 6(24) (2016) 1601254. ## [120] Q.W. Wang, H.B. Zhang, J. Liu, S. Zhao, X. Xie, L. Liu, R. Yang, N. Koratkar, Z.Z. Yu, Multifunctional and Water‐Resistant MXene‐Decorated Polyester Textiles with Outstanding Electromagnetic Interference Shielding and Joule Heating Performances, Advanced Functional Materials 29(7) (2019) 1806819. ## [121] A.S. Farooqi, M. Yusuf, M.A.I. Ishak, N.A.M. Zabidi, R. Saidur, B. Khan, B. Abdullah, O Combined H2 and CO2 Reforming of CH4 Over Ca Promoted Ni/Al 2O3 Catalyst, Advances in Material Sci-ence and Engineering: Selected Articles from ICMMPE 2020 220. ## [122] Y.-J. Tan, J. Li, Y. Gao, J. Li, S. Guo, M. Wang, A facile approach to fabricating silver-coated cotton fiber non-woven fabrics for ultrahigh electromagnetic interference shielding, Applied Surface Science 458 (2018) 236-244. ## [123] S. Choi, H. Lee, R. Ghaffari, T. Hyeon, D.H. Kim, Recent advances in flexible and stretchable bio‐electronic devices inte-grated with nanomaterials, Advanced Materials 28(22) (2016) 4203-4218. ## [124] Y. Khan, A.E. Ostfeld, C.M. Lochner, A. Pierre, A.C. Arias, Monitoring of vital signs with flexible and wearable medical devices, Advanced materials 28(22) (2016) 4373-4395. ## [125] D.H. Kim, J.A. Rogers, Stretchable electronics: mate-rials strategies and devices, Advanced materials 20(24) (2008) 4887-4892. ## [126] A. Chortos, G.I. Koleilat, R. Pfattner, D. Kong, P. Lin, R. Nur, T. Lei, H. Wang, N. Liu, Y.C. Lai, Mechanically durable and highly stretchable transistors employing carbon nanotube semiconductor and electrodes, Advanced Materials 28(22) (2016) 4441-4448. ## [127] M. Zhang, C. Wang, X. Liang, Z. Yin, K. Xia, H. Wang, M. Jian, Y. Zhang, Weft‐knitted fabric for a highly stretchable and low‐voltage wearable heater, Advanced Electronic Materials 3(9) (2017) 1700193. ## [128] Z.S. Saifaldeen, K.R. Khedir, M.F. Cansizoglu, T. Demirkan, T. Karabacak, Super-amphiphobic aluminum alloy surfaces with micro and nanoscale hierarchical roughness produced by a simple and environmentally friendly technique, Journal of Materials Science 49(4) (2014) 1839-1853. ## [129] F. Iq-bal, B. Abdullah, H. Oladipo, M. Yusuf, F. Alenazey, T.D. Nguyen, M. Ayoub, Recent developments in photo-catalytic irradiation from CO2 to methanol, Nanostructured Photocatalysts, Elsevier2021, pp. 519-540. ## [130] L.B. Hassan, N.S. Saadi, T. Karabacak, Hierarchically rough superhydrophobic copper sheets fabricated by a sandblasting and hot water treatment process, The International Journal of Advanced Manufacturing Technology 93(1) (2017) 1107-1114.