1 Preparation of bioactive polymer-based composite by different techniques and application in tissue engineering: A review https://jourcc.com/index.php/jourcc/article/view/jcc337 10.52547/jcc.3.3.7 20.1001.1.26765837.2021.3.8.7.4 1 Tissue engineering (TE) employs biological, chemical, and engineering methods to regenerate and restore injured or lost living tissues by applying biologically activated biomaterials, cells, and molecules. The fast and convenient restoration of tissue is a great challenge, emphasizing the need to imitate tissue structure and its physicochemical, biological, and mechanical behavior to give back the desired functionality of damaged tissue. Depending on the particular tissue, numerous requirements have to be fulfilled with the help of material and scaffold design that provides a base for cell adhesion and proliferation. As a result, countless biodegradable and bioresorbable materials have been extensively examined. Composite systems combine the benefits of bioactive ceramics and polymers, which seem to be good alternatives for bone tissue engineering. This article intends to introduce bioactive polymer, tissue engineering methods, the kinds of biomaterials applied in scaffold invention, and the different approaches to producing the bioactive polymer-based composites with various structures such as porous, membrane, and 3D structure. Biomaterials and invention techniques could crucially influence the consequences of the scaffold's design architectures, cell proliferation, and mechanical behavior. Moreover, an excellent scaffold assists cell generation and the provision of cell nutrients in the human body with their particular material characteristics. 194 205 Mohammad Azad Alam Universiti Teknologi Petronas Malaysia info@jourcc.com Mohammad Hamed Asoushe University of Tehran Iran info@jourcc.com Pouran Pourhakkak Payame Noor University Iran info@jourcc.com Lukas Gritsch Université Clermont Auvergne France info@jourcc.com Alireza Alipour Ashkezar Branch, Islamic Azad University (IAU) Iran info@jourcc.com Somaye Mohammadi University of Kashan Iran mohamadi_s65@yahoo.com Scaffold Tissue engineering Biodegradable Bioresorbable polymer-based composites Activated biomaterials Bioactive polymer-based composite Article7.pdf [1] M.S. Chapekar, Tissue engineering: challenges and opportunities, J. Biomed. Mater. Res. An Off. J. Soc. Biomater. Japanese Soc. Biomater. Aust. Soc. Biomater. Korean Soc. Biomater. 53 (2000) 617–620. ## [2] S. Yin, W. Zhang, Z. Zhang, X. Jiang, Recent Advances in Scaffold Design and Material for Vascularized Tissue-Engineered Bone Regeneration, Adv. Healthc. Mater. 8 (2019) 1801433. ## [3] L.G. Griffith, G. Naughton, Tissue engineering--current challenges and expanding opportunities, Science (80-. ). 295 (2002) 1009–1014. ## [4] The Binary Genetic Algorithm, in Practical Genetic Algorithms. (2003) 27-50. ## [5] D. Nesic, R. Whiteside, M. Brittberg, D. Wendt, I. Martin, P. Mainil-Varlet, Cartilage tissue engineering for degenerative joint disease, Adv. Drug Deliv. Rev. 58 (2006) 300–322. ## [6] A.A. Vu, D.A. Burke, A. Bandyopadhyay, S. Bose, Effects of surface area and topography on 3D printed tricalcium phosphate scaffolds for bone grafting applications, Addit. Manuf. 39 (2021) 101870. ## [7] J. Sun, Q. Zheng, Y. Wu, Y. Liu, X. Guo, W. Wu, Biocompatibility of KLD-12 peptide hydrogel as a scaffold in tissue engineering of intervertebral discs in rabbits, J. Huazhong Univ. Sci. Technol. [Medical Sci. 30 (2010) 173–177. ## [8] A. Mishra, Y. Loo, R. Deng, Y.J. Chuah, H.T. Hee, J.Y. Ying, C.A.E. Hauser, Ultrasmall natural peptides self-assemble to strong temperature-resistant helical fibers in scaffolds suitable for tissue engineering, Nano Today. 6 (2011) 232–239. ## [9] B.-S. Kim, D.J. Mooney, Development of biocompatible synthetic extracellular matrices for tissue engineering, Trends Biotechnol. 16 (1998) 224–230. ## [10] B. Guo, P.X. Ma, Synthetic biodegradable functional polymers for tissue engineering: a brief review, Sci. China Chem. 57 (2014) 490–500. ## [11] A.B. Pratt, F.E. Weber, H.G. Schmoekel, R. Müller, J.A. Hubbell, Synthetic extracellular matrices for in situ tissue engineering, Biotechnol. Bioeng. 86 (2004) 27–36. ## [12] J.D. Kretlow, A.G. Mikos, Mineralization of synthetic polymer scaffolds for bone tissue engineering, Tissue Eng. 13 (2007) 927–938. ## [13] R.S. Bhatnagar, J.J. Qian, A. Wedrychowska, M. Sadeghi, Y.M. Wu, N. Smith, Design of biomimetic habitats for tissue engineering with P-15, a synthetic peptide analogue of collagen, Tissue Eng. 5 (1999) 53–65. ## [14] M.P. Lutolf, J.A. Hubbell, Synthetic biomaterials as instructive extracellular microenvironments for morphogenesis in tissue engineering, Nat. Biotechnol. 23 (2005) 47–55. ## [15] K.P. Andriano, Y. Tabata, Y. Ikada, J. Heller, In vitro and in vivo comparison of bulk and surface hydrolysis in absorbable polymer scaffolds for tissue engineering, J. Biomed. Mater. Res. An Off. J. Soc. Biomater. Japanese Soc. Biomater. Aust. Soc. Biomater. Korean Soc. Biomater. 48 (1999) 602–612. ## [16] A. Kyzioł, K. Kyzioł, Surface functionalization with biopolymers via plasma-assisted surface grafting and plasma-induced graft polymerization—materials for biomedical applications, in: Biopolym. Grafting, Elsevier, (2018) 115–151. ## [17] T. Tariverdian, F. Sefat, M. Gelinsky, M. Mozafari, Scaffold for bone tissue engineering, in: Handb. Tissue Eng. Scaffolds Vol. One, Elsevier, (2019) 189–209. ## [18] E.I. Paşcu, Bioactive and biodegradable scaffolds for hard tissue engineering, (2009). ## [19] J.M. Dang, K.W. Leong, Natural polymers for gene delivery and tissue engineering, Adv. Drug Deliv. Rev. 58 (2006) 487–499. ## [20] S.A. Sell, P.S. Wolfe, K. Garg, J.M. McCool, I.A. Rodriguez, G.L. Bowlin, The use of natural polymers in tissue engineering: a focus on electrospun extracellular matrix analogues, Polymers (Basel). 2 (2010) 522–553. ## [21] M. Swetha, K. Sahithi, A. Moorthi, N. Srinivasan, K. Ramasamy, N. Selvamurugan, Biocomposites containing natural polymers and hydroxyapatite for bone tissue engineering, Int. J. Biol. Macromol. 47 (2010) 1–4. ## [22] M. Laurenti, V. Cauda, Biodegradable polymer nanocomposites for tissue engineering: Synthetic strategies and related applications, in: Mater. Biomed. Eng., Elsevier, (2019) 157–198. ## [23] X. Wang, B. Ding, B. Li, Biomimetic electrospun nanofibrous structures for tissue engineering, Mater. Today. 16 (2013) 229–241. ## [24] R. Sahay, P.S. Kumar, R. Sridhar, J. Sundaramurthy, J. Venugopal, S.G. Mhaisalkar, S. Ramakrishna, Electrospun composite nanofibers and their multifaceted applications, J. Mater. Chem. 22 (2012) 12953–12971. ## [25] A.E. Erickson, J. Sun, S.K.L. Levengood, S. Swanson, F.-C. Chang, C.T. Tsao, M. Zhang, Chitosan-based composite bilayer scaffold as an in vitro osteochondral defect regeneration model, Biomed. Microdevices. 21 (2019) 1–16. ## [26] M. Choudhury, S. Mohanty, S. Nayak, Effect of different solvents in solvent casting of porous PLA scaffolds—In biomedical and tissue engineering applications, J. Biomater. Tissue Eng. 5 (2015) 1–9. ## [27] B. Zavan, R. Cortivo, G. Abatangelo, Hydrogels and tissue engineering, in: Hydrogels, Springer, (2009) 1–8. ## [28] D.J. Richards, Y. Tan, J. Jia, H. Yao, Y. Mei, 3D printing for tissue engineering, Isr. J. Chem. 53 (2013) 805–814. ## [29] S. Mohammadi, H. Naeimi, A synergetic effect of sonication with yolk-shell nanocatalyst for green synthesis of spirooxindoles, Green Chem. Lett. Rev. 14 (2021) 344–356. ## [30] H. Naeimi, S. Mohammadi, Synthesis of 1H‐Isochromenes, 4H‐Chromenes and Orthoaminocarbonitrile Tetrahydronaphthalenes by CaMgFe2O4 Base Nanocatalyst, ChemistrySelect. 5 (2020) 2627–2633. ## [31] S. Mohammadi, H. Naeimi, A bifunctional Yolk–Shell nanocatalyst with Lewis and organic functional base for the synthesis of spirooxindoles, Appl. Catal. A Gen. 602 (2020) 117720. ## [32] A. Muxika, A. Etxabide, J. Uranga, P. Guerrero, K. De La Caba, Chitosan as a bioactive polymer: Processing, properties and applications, Int. J. Biol. Macromol. 105 (2017) 1358–1368. ## [33] A. Michiardi, G. Hélary, P.-C. Nguyen, L.J. Gamble, F. Anagnostou, D.G. Castner, V. Migonney, Bioactive polymer grafting onto titanium alloy surfaces, Acta Biomater. 6 (2010) 667–675. ## [34] D.F. Williams, On the nature of biomaterials, Biomaterials. 30 (2009) 5897–5909. ## [35] J. Liao, X. Guo, K.J. Grande-Allen, F.K. Kasper, A.G. Mikos, Bioactive polymer/extracellular matrix scaffolds fabricated with a flow perfusion bioreactor for cartilage tissue engineering, Biomaterials. 31 (2010) 8911–8920. ## [36] R. Gentsch, F. Pippig, S. Schmidt, P. Cernoch, J. Polleux, H.G. Börner, Single-step electrospinning to bioactive polymer nanofibers, Macromolecules. 44 (2011) 453–461. ## [37] I. Sukmana, Bioactive polymer scaffold for fabrication of vascularized engineering tissue, J. Artif. Organs. 15 (2012) 215–224. ## [38] H. Nargesi khoramabadi, M. Arefian, M. Hojjati, I. Tajzad, A. Mokhtarzade, M. Mazhar, A. Jamavari, A review of Polyvinyl alcohol/Carboxymethyl cellulose (PVA/CMC) composites for various applications, J. Compos. Compd. 2 (2020) 69–76. ## [39] J. Daraei, Production and characterization of PCL (Polycaprolactone) coated TCP/nanoBG composite scaffolds by sponge foam method for orthopedic applications, J. Compos. Compd. 2 (2020) 44–49. ## [40] W. Cao, L.L. Hench, Bioactive materials, Ceram. Int. 22 (1996) 493–507. ## [41] W. He, R. Benson, Polymeric biomaterials, in: Appl. Plast. Eng. Handb., Elsevier, (2017) 145–164. ## [42] M. Chi, M. Qi, P. Wang, M.D. Weir, M.A. Melo, X. Sun, B. Dong, C. Li, J. Wu, L. Wang, Novel bioactive and therapeutic dental polymeric materials to inhibit periodontal pathogens and biofilms, Int. J. Mol. Sci. 20 (2019) 278. ## [43] A. Abuchenari, K. Hardani, S. Abazari, F. Naghdi, M.A. Keleshteri, A. Jamavari, A.M. Chahardehi, Clay-reinforced nanocomposites for the slow release of chemical fertilizers and water retention, J. Compos. Compd. 2 (2020) 85–91. ## [44] J.S. Patel, S. V Patel, N.P. Talpada, H.A. Patel, Bioactive polymers: Synthesis, release study and antimicrobial properties of polymer bound Ampicillin, Die Angew. Makromol. Chemie. 271 (1999) 24–27. ## [45] C.G. Gebelein, C.E. Carraher, Biotechnology and bioactive polymers, Springer, 1994. ## [46] K. Varaprasad, G.M. Raghavendra, T. Jayaramudu, M.M. Yallapu, R. Sadiku, A mini review on hydrogels classification and recent developments in miscellaneous applications, Mater. Sci. Eng. C. 79 (2017) 958–971. ## [47] P. Parida, A. Behera, S.C. Mishra, Classification of Biomaterials used in Medicine, (2012). ## [48] M.E.S. Hassan, J. Bai, D.-Q. Dou, Biopolymers; definition, classification and applications, Egypt. J. Chem. 62 (2019) 1725–1737. ## [49] K. Zhang, Q. Van Le, Bioactive glass coated zirconia for dental implants: a review, J. Compos. Compd. 2 (2020) 10–17. ## [50] M.D. Steven, J.H. Hotchkiss, Non-migratory bioactive polymers (NMBP) in food packaging, Woodhead Publishing Ltd, Cambridge, UK, 2003. ## [51] Y. Ikada, H. Tsuji, Biodegradable polyesters for medical and ecological applications, Macromol. Rapid Commun. 21 (2000) 117–132. ## [52] M. Kurakula, N.R. Naveen, Prospection of recent chitosan biomedical trends: Evidence from patent analysis (2009–2020), Int. J. Biol. Macromol. (2020). ## [53] G. Radenković, D. Petković, Metallic biomaterials, in: Biomater. Clin. Pract., Springer, (2018) 183–224. ## [54] A.R. Boccaccini, J.J. Blaker, Bioactive composite materials for tissue engineering scaffolds, Expert Rev. Med. Devices. 2 (2005) 303–317. ## [55] M.-H. Thibault, C. Comeau, G. Vienneau, J. Robichaud, D. Brown, R. Bruening, L.J. Martin, Y. Djaoued, Assessing the potential of boronic acid/chitosan/bioglass composite materials for tissue engineering applications, Mater. Sci. Eng. C. 110 (2020) 110674. ## [56] Q. Chen, J.A. Roether, A.R. Boccaccini, Tissue engineering scaffolds from bioactive glass and composite materials, Top. Tissue Eng. 4 (2008) 1–27. ## [57] R.A. MacDonald, B.F. Laurenzi, G. Viswanathan, P.M. Ajayan, J.P. Stegemann, Collagen–carbon nanotube composite materials as scaffolds in tissue engineering, J. Biomed. Mater. Res. Part A An Off. J. Soc. Biomater. Japanese Soc. Biomater. Aust. Soc. Biomater. Korean Soc. Biomater. 74 (2005) 489–496. ## [58] M.R. Ghahramani, A.A. Garibov, T.N. Agayev, M.A. Mohammadi, A novel way to production yttrium glass microspheres for medical applications, Glas. Phys. Chem. 40 (2014) 283–287. ## [59] S.M. Kenny, M. Buggy, Bone cements and fillers: a review, J. Mater. Sci. Mater. Med. 14 (2003) 923–938. ## [60] M. Kobayashi, T. Nakamura, Y. Okada, A. Fukumoto, T. Furukawa, H. Kato, T. Kokubo, T. Kikutani, Bioactive bone cement: Comparison of apatite and wollastonite containing glass‐ceramic, hydroxyapatite, and β‐tricalcium phosphate fillers on bone‐bonding strength, J. Biomed. Mater. Res. An Off. J. Soc. Biomater. Japanese Soc. Biomater. Aust. Soc. Biomater. 42 (1998) 223–237. ##[61] F. Hajiali, S. Tajbakhsh, A. Shojaei, Fabrication and properties of polycaprolactone composites containing calcium phosphate-based ceramics and bioactive glasses in bone tissue engineering: a review, Polym. Rev. 58 (2018) 164–207. ## [62] A. Hoppe, N.S. Güldal, A.R. Boccaccini, A review of the biological response to ionic dissolution products from bioactive glasses and glass-ceramics, Biomaterials. 32 (2011) 2757–2774. ## [63] T.J. Brunner, W.J. Stark, A.R. Boccaccini, Nanoscale bioactive silicate glasses in biomedical applications, Pref. XV List Contrib. XIX. (2009). ## [64] L.L. HENCH, A.J. SALINAS, Bioactivity of silicate glasses containing phosphate, Phosphorus Res. Bull. 6 (1996) 51–58. ## [65] K. Fujikura, N. Karpukhina, T. Kasuga, D.S. Brauer, R.G. Hill, R. V Law, Influence of strontium substitution on structure and crystallisation of Bioglass® 45S5, J. Mater. Chem. 22 (2012) 7395–7402. ## [66] K. Rezwan, Q.Z. Chen, J.J. Blaker, A.R. Boccaccini, Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering, Biomaterials. 27 (2006) 3413–3431. ## [67] W. Florkiewicz, D. Słota, A. Placek, K. Pluta, B. Tyliszczak, T.E.L. Douglas, A. Sobczak-Kupiec, Synthesis and characterization of polymer-based coatings modified with bioactive ceramic and bovine serum albumin, J. Funct. Biomater. 12 (2021) 21. ## [68] J.K.Y. Lee, N. Chen, S. Peng, L. Li, L. Tian, N. Thakor, S. Ramakrishna, Polymer-based composites by electrospinning: Preparation and functionalization with nanocarbons, Prog. Polym. Sci. 86 (2018) 40–84. ## [69] Z. Guo, A.A. Poot, D.W. Grijpma, Advanced polymer-based composites and structures for biomedical applications, Eur. Polym. J. 149 (2021) 110388. ## [70] N. Cioffi, L. Torsi, N. Ditaranto, G. Tantillo, L. Ghibelli, L. Sabbatini, T. Bleve-Zacheo, M. D’Alessio, P.G. Zambonin, E. Traversa, Copper nanoparticle/polymer composites with antifungal and bacteriostatic properties, Chem. Mater. 17 (2005) 5255–5262. ## [71] G. Joshi, V. Sharma, R. Saxena, K.S. Yadav, Polylactic coglycolic acid (PLGA)-based green materials for drug delivery, in: Appl. Adv. Green Mater., Elsevier, (2021) 425–440. ## [72] G.S. Mann, L.P. Singh, P. Kumar, S. Singh, C. Prakash, On briefing the surface modifications of polylactic acid: A scope for betterment of biomedical structures, J. Thermoplast. Compos. Mater. (2019) 0892705719856052. ## [73] H. Zhou, J.G. Lawrence, S.B. Bhaduri, Fabrication aspects of PLA-CaP/PLGA-CaP composites for orthopedic applications: a review, Acta Biomater. 8 (2012) 1999–2016. ## [74] P.S.P. Poh, M.A. Woodruff, E. García-Gareta, Polymer-based composites for musculoskeletal regenerative medicine, in: Biomater. Organ Tissue Regen., Elsevier, (2020) 33–82. ## [75] C.R. Holkar, A.J. Jadhav, S.E. Karekar, A.B. Pandit, D.V. Pinjari, Recent developments in synthesis of nanomaterials utilized in polymer based composites for food packaging applications, (n.d.). ## [76] A. Jha, A. Kumar, Biobased technologies for the efficient extraction of biopolymers from waste biomass, Bioprocess Biosyst. Eng. 42 (2019) 1893–1901. ## [77] Y. Liu, P. Yin, J. Chen, B. Cui, C. Zhang, F. Wu, Conducting polymer-based composite materials for therapeutic implantations: from advanced drug delivery system to minimally invasive electronics, Int. J. Polym. Sci. 2020 (2020). ## [78] L. Lu, A.G. Mikos, The importance of new processing techniques in tissue engineering, Mrs Bull. 21 (1996) 28–32. ## [79] A. Prasad, M.R. Sankar, V. Katiyar, State of art on solvent casting particulate leaching method for orthopedic scaffoldsfabrication, Mater. Today Proc. 4 (2017) 898–907. ## [80] W.L. Murphy, R.G. Dennis, J.L. Kileny, D.J. Mooney, Salt fusion: an approach to improve pore interconnectivity within tissue engineering scaffolds, Tissue Eng. 8 (2002) 43–52. ## [81] R. Huang, X. Zhu, H. Tu, A. Wan, The crystallization behavior of porous poly (lactic acid) prepared by modified solvent casting/particulate leaching technique for potential use of tissue engineering scaffold, Mater. Lett. 136 (2014) 126–129. ## [82] X. Zhu, T. Zhong, R. Huang, A. Wan, Preparation of hydrophilic poly (lactic acid) tissue engineering scaffold via (PLA)-(PLA-b-PEG)-(PEG) solution casting and thermal-induced surface structural transformation, J. Biomater. Sci. Polym. Ed. 26 (2015) 1286–1296. ## [83] A. Moghanian, A. Ghorbanoghli, M. Kazem‐Rostami, A. Pazhouheshgar, E. Salari, M. Saghafi Yazdi, T. Alimardani, H. Jahani, F. Sharifian Jazi, M. Tahriri, Novel antibacterial Cu/Mg‐substituted 58S‐bioglass: Synthesis, characterization and investigation of in vitro bioactivity, Int. J. Appl. Glas. Sci. 11 (2020) 685–698. ## [84] P. Abasian, M. Radmansouri, M.H. Jouybari, M.V. Ghasemi, A. Mohammadi, M. Irani, F.S. Jazi, Incorporation of magnetic NaX zeolite/DOX into the PLA/chitosan nanofibers for sustained release of doxorubicin against carcinoma cells death in vitro, Int. J. Biol. Macromol. 121 (2019) 398–406. ## [85] S. Lee, B. Kim, S.H. Kim, S.W. Kang, Y.H. Kim, Thermally produced biodegradable scaffolds for cartilage tissue engineering, Macromol. Biosci. 4 (2004) 802–810. ## [86] L. Lu, S.J. Peter, M.D. Lyman, H.-L. Lai, S.M. Leite, J.A. Tamada, J.P. Vacanti, R. Langer, A.G. Mikos, In vitro degradation of porous poly (L-lactic acid) foams, Biomaterials. 21 (2000) 1595–1605. ## [87] J.M. Taboas, R.D. Maddox, P.H. Krebsbach, S.J. Hollister, Indirect solid free form fabrication of local and global porous, biomimetic and composite 3D polymer-ceramic scaffolds, Biomaterials. 24 (2003) 181–194. ## [88] R.C. Thomson, M.C. Wake, M.J. Yaszemski, A.G. Mikos, Biodegradable polymer scaffolds to regenerate organs, Biopolym. Ii. (1995) 245–274. ## [89] N. Thadavirul, P. Pavasant, P. Supaphol, Development of polycaprolactone porous scaffolds by combining solvent casting, particulate leaching, and polymer leaching techniques for bone tissue engineering, J. Biomed. Mater. Res. Part A. 102 (2014) 3379–3392. ## [90] R.C. Thomson, A.K. Shung, M.J. Yaszemski, A.G. Mikos, Polymer scaffold processing, Princ. Tissue Eng. 2 (2000) 251–262. ## [91] K.H. Bouhadir, D.J. Mooney, In vitro and In vivo Models for the Reconstruction of Intercellular Signaling a, (1998). ## [92] S.L. Ishaug-Riley, L.E. Okun, G. Prado, M.A. Applegate, A. Ratcliffe, Human articular chondrocyte adhesion and proliferation on synthetic biodegradable polymer films, Biomaterials. 20 (1999) 2245–2256. ## [93] M. Singh, B. Sandhu, A. Scurto, C. Berkland, M.S. Detamore, Microsphere-based scaffolds for cartilage tissue engineering: Using subcritical CO2 as a sintering agent, Acta Biomater. 6 (2010) 137–143. ## [94] B. Duan, M. Wang, Encapsulation and release of biomolecules from Ca–P/PHBV nanocomposite microspheres and three-dimensional scaffolds fabricated by selective laser sintering, Polym. Degrad. Stab. 95 (2010) 1655–1664. ## [95] L.S. Fard, N.S. Peighambardoust, H.W. Jang, A. Dehghan, N.N.K. Saligheh, M. Iranpour, M.I. Rajabi, The rechargeable aluminum-ion battery with different composite cathodes: A review, J. Compos. Compd. 2 (2020) 138–146. ## [96] A.A. Chaudhari, K. Vig, D.R. Baganizi, R. Sahu, S. Dixit, V. Dennis, S.R. Singh, S.R. Pillai, Future prospects for scaffolding methods and biomaterials in skin tissue engineering: a review, Int. J. Mol. Sci. 17 (2016) 1974. ## [97] T. Weigel, G. Schinkel, A. Lendlein, Design and preparation of polymeric scaffolds for tissue engineering, Expert Rev. Med. Devices. 3 (2006) 835–851. ## [98] L.S. Farda, N.S. Peighambardoustb, H.W. Jangc, A. Dehghand, N.N.K. Salighehe, M. Iranpourf, M.I. Rajabig, Journal of Composites and Compounds, (2020). ## [99] K.M.Z. Hossain, U. Patel, I. Ahmed, Development of microspheres for biomedical applications: a review, Prog. Biomater. 4 (2015) 1–19. https://doi.org/10.1007/s40204-014-0033-8. ## [100] I.J. Roh, S. Ramaswamy, W.B. Krantz, A.R. Greenberg, Poly (ethylene chlorotrifluoroethylene) membrane formation via thermally induced phase separation (TIPS), J. Memb. Sci. 362 (2010) 211–220. ## [101] J.T. Jung, J.F. Kim, H.H. Wang, E. Di Nicolo, E. Drioli, Y.M. Lee, Understanding the non-solvent induced phase separation (NIPS) effect during the fabrication of microporous PVDF membranes via thermally induced phase separation (TIPS), J. Memb. Sci. 514 (2016) 250–263. ## [102] H. Matsuyama, S. Berghmans, D.R. Lloyd, Formation of anisotropic membranes via thermally induced phase separation, Polymer (Guildf). 40 (1999) 2289–2301. ## [103] Y.S. Nam, T.G. Park, Porous biodegradable polymeric scaffolds prepared by thermally induced phase separation, J. Biomed. Mater. Res. An Off. J. Soc. Biomater. Japanese Soc. Biomater. Aust. Soc. Biomater. Korean Soc. Biomater. 47 (1999) 8–17. ## [104] H. Matsuyama, M. Yuasa, Y. Kitamura, M. Teramoto, D.R. Lloyd, Structure control of anisotropic and asymmetric polypropylene membrane prepared by thermally induced phase separation, J. Memb. Sci. 179 (2000) 91–100. ## [105] D.R. Lloyd, S.S. Kim, K.E. Kinzer, Microporous membrane formation via thermally-induced phase separation. II. Liquid—liquid phase separation, J. Memb. Sci. 64 (1991) 1–11. ## [106] R. Zeinali, L.J. Del Valle, J. Torras, J. Puiggalí, Recent progress on biodegradable tissue engineering scaffolds prepared by thermally-induced phase separation (Tips), Int. J. Mol. Sci. 22 (2021) 3504. ## [107] Y.S. Nam, T.G. Park, Biodegradable polymeric microcellular foams by modified thermally induced phase separation method, Biomaterials. 20 (1999) 1783–1790. ## [108] G. Chen, Y. Lin, X. Wang, Formation of microporous membrane of isotactic polypropylene in dibutyl phthalate‐soybean oil via thermally induced phase separation, J. Appl. Polym. Sci. 105 (2007) 2000–2007. ## [109] S.S. Kim, D.R. Lloyd, Thermodynamics of polymer/diluent systems for thermally induced phase separation: 2. Solid-liquid phase separation systems, Polymer (Guildf). 33 (1992) 1036–1046. ## [110] I.L. TUTOR, PLLA-BASED SCAFFOLDS FOR OSTEOCHONDRAL TISSUE REGENERATION VIA THERMALLY INDUCED PHASE SEPARATION TECHNIQUE, (n.d.). ## [111] X. Li, X. Lu, Morphology of polyvinylidene fluoride and its blend in thermally induced phase separation process, J. Appl. Polym. Sci. 101 (2006) 2944–2952. ## [112] Z. Cui, N.T. Hassankiadeh, S.Y. Lee, J.M. Lee, K.T. Woo, A. Sanguineti, V. Arcella, Y.M. Lee, E. Drioli, Poly (vinylidene fluoride) membrane preparation with an environmental diluent via thermally induced phase separation, J. Memb. Sci. 444 (2013) 223–236. ## [113] G.A. Mannella, G. Conoscenti, F.C. Pavia, V. La Carrubba, V. Brucato, Preparation of polymeric foams with a pore size gradient via Thermally Induced Phase Separation (TIPS), Mater. Lett. 160 (2015) 31–33. ## [114] F.C. Pavia, V. La Carrubba, S. Piccarolo, V.M.B. Brucato, Polymeric scaffolds prepared via thermally induced phase separation: tuning of structure and morphology, J. Biomed. Mater. Res. Part A An Off. J. Soc. Biomater. Japanese Soc. Biomater. Aust. Soc. Biomater. Korean Soc. Biomater. 86 (2008) 459–466. ## [115] R. Akbarzadeh, A. Yousefi, Effects of processing parameters in thermally induced phase separation technique on porous architecture of scaffolds for bone tissue engineering, J. Biomed. Mater. Res. Part B Appl. Biomater. 102 (2014) 1304–1315. ## [116] J.T. Jung, H.H. Wang, J.F. Kim, J. Lee, J.S. Kim, E. Drioli, Y.M. Lee, Tailoring nonsolvent-thermally induced phase separation (N-TIPS) effect using triple spinneret to fabricate high performance PVDF hollow fiber membranes, J. Memb. Sci. 559 (2018) 117–126. ## [117] D.R. Lloyd, K.E. Kinzer, H.S. Tseng, Microporous membrane formation via thermally induced phase separation. I. Solid-liquid phase separation, J. Memb. Sci. 52 (1990) 239–261. ## [118] D. Li, W.B. Krantz, A.R. Greenberg, R.L. Sani, Membrane formation via thermally induced phase separation (TIPS): Model development and validation, J. Memb. Sci. 279 (2006) 50–60. ## [119] H. Khalilpour, P. Shafiee, A. Darbandi, M. Yusuf, S. Mahmoudi, Z. Moazzami Goudarzi, S. Mirzamohammadi, Application of Polyoxometalate-based composites for sensor systems: A review, J. Compos. Compd. 3 (2021) 129–139. https://doi.org/10.52547/jcc.3.2.6. ## [120] S. Ramaswamy, A.R. Greenberg, W.B. Krantz, Fabrication of poly (ECTFE) membranes via thermally induced phase separation, J. Memb. Sci. 210 (2002) 175–180. ##[121] F. Sharifianjazi, A.H. Pakseresht, M.S. Asl, A. Esmaeilkhanian, H.W. Jang, M. Shokouhimehr, Hydrox-yapatite consolidated by zirconia: applications for dental implant, J. Compos. Compd. 2 (2020) 26–34. ## [122] M.Z. Moghadam, S. Hassanajili, F. Esmaeilzadeh, M. Ayatollahi, M. Ahmadi, Formation of porous HPCL/LPCL/HA scaffolds with supercritical CO2 gas foaming method, J. Mech. Behav. Biomed. Mater. 69 (2017) 115–127. ## [123] L.J. White, V. Hutter, H. Tai, S.M. Howdle, K.M. Shakesheff, The effect of pro-cessing variables on morphological and mechanical properties of supercritical CO2 foamed scaffolds for tis-sue engineering, Acta Biomater. 8 (2012) 61–71. ## [124] A. Salerno, S. Zeppetelli, E. Di Maio, S. Iannace, P.A. Netti, Design of bimodal PCL and PCL‐HA nanocomposite scaffolds by two step depressurization during solid‐state supercritical CO2 foaming, Macromol. Rapid Commun. 32 (2011) 1150–1156. ## [125] C.-X. Chen, Q.-Q. Liu, X. Xin, Y.-X. Guan, S.-J. Yao, Pore formation of poly (ε-caprolactone) scaffolds with melt-ing point reduction in supercritical CO2 foaming, J. Supercrit. Fluids. 117 (2016) 279–288. ## [126] A. Saler-no, S. Zeppetelli, E. Di Maio, S. Iannace, P.A. Netti, Novel 3D porous multi-phase composite scaffolds based on PCL, thermoplastic zein and ha prepared via supercritical CO2 foaming for bone regeneration, Compos. Sci. Technol. 70 (2010) 1838–1846. ## [127] M. Alizadeh, F. Sharifianjazi, E. Haghshenasjazi, M. Aghakhani, L. Rajabi, Production of nanosized boron oxide powder by high-energy ball milling, Synth. React. Inorganic, Met. Nano-Metal Chem. 45 (2015) 11–14. ## [128] F.S. Jazi, N. Parvin, M. Tahriri, M. Alizadeh, S. Abedini, M. Alizadeh, The relationship between the synthesis and morphology of SnO2-Ag2O nanocomposite, Synth. React. Inorganic, Met. Nano-Metal Chem. 44 (2014) 759–764. ## [129] R. Jiang, T. Liu, Z. Xu, C.B. Park, L. Zhao, Improving the continuous microcellular extrusion foaming ability with supercritical CO2 of thermo-plastic polyether ester elastomer through in-situ fibrillation of polytetrafluoroethylene, Polymers (Basel). 11 (2019) 1983. ## [130] K. Wang, Y. Pang, F. Wu, W. Zhai, W. Zheng, Cell nucleation in dominating formation of bimodal cell structure in polypropylene/polystyrene blend foams prepared via continuous extrusion with supercritical CO2, J. Supercrit. Fluids. 110 (2016) 65–74. ## [131] Y. Jia, S. Bai, C.B. Park, Q. Wang, Effect of boric acid on the foaming properties and cell structure of poly (vinyl alcohol) foam prepared by supercriti-cal-CO2 thermoplastic extrusion foaming, Ind. Eng. Chem. Res. 56 (2017) 6655–6663. ## [132] L.M. Matu-ana, C.A. Diaz, Study of cell nucleation in microcellular poly (lactic acid) foamed with supercritical CO2 through a continuous-extrusion process, Ind. Eng. Chem. Res. 49 (2010) 2186–2193. ## [133] H.-Y. Mi, X. Jing, Y. Liu, L. Li, H. Li, X.-F. Peng, H. Zhou, Highly durable superhydrophobic polymer foams fabricated by extrusion and supercritical CO2 foaming for selective oil absorption, ACS Appl. Mater. Interfaces. 11 (2019) 7479–7487. ## [134] N. Le Moigne, M. Sauceau, M. Benyakhlef, R. Jemai, J.-C. Bénézet, E. Rodier, J.-M. Lopez-Cuesta, J. Fages, Foaming of poly (3-hydroxybutyrate-co-3-hydroxyvalerate)/organo-clays nano-biocomposites by a continuous supercritical CO2 assisted extrusion process, Eur. Polym. J. 61 (2014) 157–171. ## [135] M. Chauvet, M. Sauceau, J. Fages, Extrusion assisted by supercritical CO2: A review on its ap-plication to biopolymers, J. Supercrit. Fluids. 120 (2017) 408–420. ## [136] R. Kapoor, A. Jash, S.S.H. Rizvi, Shelf-life extension of Paneer by a sequential supercritical-CO2-based process, LWT. 135 (2021) 110060. ## [137] A. Nouri, B. Faraji Dizaji, N. Kianinejad, A. Jafari Rad, S. Rahimi, M. Irani, F. Sharifian Jazi, Simulta-neous linear release of folic acid and doxorubicin from ethyl cellulose/chitosan/g-C3N4/MoS2 core-shell nano-fibers and its anticancer properties, J. Biomed. Mater. Res. Part A. 109 (2021) 903–914. ## [138] S. Khorshidi, A. Solouk, H. Mirzadeh, S. Mazinani, J.M. Lagaron, S. Sharifi, S. Ramakrishna, A review of key challenges of electrospun scaffolds for tissue-engineering applications, J. Tissue Eng. Regen. Med. 10 (2016) 715–738. ## [139] A.P. Kishan, E.M. Cosgriff-Hernandez, Recent advancements in electrospinning design for tissue engi-neering applications: A review, J. Biomed. Mater. Res. Part A. 105 (2017) 2892–2905. ## [140] D.R. Nisbet, J.S. Forsythe, W. Shen, D.I. Finkelstein, M.K. Horne, A review of the cellular response on electrospun nano-fibers for tissue engineering, J. Biomater. Appl. 24 (2009) 7–29. ## [141] H. Pan, L. Li, L. Hu, X. Cui, Contin-uous aligned polymer fibers produced by a modified electrospinning method, Polymer (Guildf). 47 (2006) 4901–4904. ## [142] H. Li, X. Chen, W. Lu, J. Wang, Y. Xu, Y. Guo, Application of Electrospinning in Anti-bacterial Field, Nanomaterials. 11 (2021) 1822. ## [143] X. Wang, K. Zhang, M. Zhu, H. Yu, Z. Zhou, Y. Chen, B.S. Hsiao, Continuous polymer nanofiber yarns prepared by self-bundling electrospinning method, Polymer (Guildf). 49 (2008) 2755–2761. ## [144] Y.-H. Wu, D.-G. Yu, H.-P. Li, X.-Y. Wu, X.-Y. Li, Medicat-ed structural PVP/PEG composites fabricated using coaxial electrospinning, E-Polymers. 17 (2017) 39–44. ## [145] G. Sargazi, D. Afzali, A. Mostafavi, H. Kazemian, A novel composite derived from a metal organic framework immobilized within electrospun nanofibrous polymers: An efficient methane adsorbent, Appl. Or-ganomet. Chem. 34 (2020) e5448. ## [146] W.E. Teo, S. Ramakrishna, A review on electrospinning design and nanofibre assemblies, Nanotechnology. 17 (2006) R89. ## [147] H.Y. Li, M.M. Bubakir, T. Xia, X.F. Zhong, Y.M. Ding, W.M. Yang, Mass production of ultra-fine fibre by melt electrospinning method using umbellate spinneret, Mater. Res. Innov. 18 (2014) S4-921. ## [148] F.S. Jazi, N. Parvin, M. Rabiei, M. Tahriri, Z.M. Shabestari, A.R. Azadmehr, Effect of the synthesis route on the grain size and morphology of ZnO/Ag nanocomposite, J. Ceram. Process. Res. 13 (2012) 523–526. ## [149] M.J. Mochane, T.S. Motsoeneng, E.R. Sadiku, T.C. Mokhena, J.S. Sefadi, Morphology and properties of electrospun PCL and its composites for medical applications: A mini review, Appl. Sci. 9 (2019) 2205. ## [150] F.A. Sheikh, H.W. Ju, J.M. Lee, B.M. Moon, H.J. Park, O.J. Lee, J.-H. Kim, D.-K. Kim, C.H. Park, 3D electrospun silk fibroin nanofibers for fabri-cation of artificial skin, Nanomedicine Nanotechnology, Biol. Med. 11 (2015) 681–691. ## [151] A. Shokati, A.N. Moghadasi, M. Nikbakht, M.A. Sahraian, S.A. Mousavi, J. Ai, A focus on allogeneic mesenchymal stro-mal cells as a versatile therapeutic tool for treating multiple sclerosis, Stem Cell Res. Ther. 12 (2021) 1–13. ## [152] Y. Piao, H. You, T. Xu, H.-P. Bei, I.Z. Piwko, Y.Y. Kwan, X. Zhao, Biomedical applications of gela-tin methacryloyl hydrogels, Eng. Regen. 2 (2021) 47–56. ## [153] X. Sun, Q. Lang, H. Zhang, L. Cheng, Y. Zhang, G. Pan, X. Zhao, H. Yang, Y. Zhang, H.A. Santos, Electrospun photocrosslinkable hydrogel fibrous scaffolds for rapid in vivo vascularized skin flap regeneration, Adv. Funct. Mater. 27 (2017) 1604617. ## [154] G.Y. Xu, L.N. Chen, Z.Y. Xin, Y.X. Liu, T.C. Li, L.P. An, G.X. Yuan, Y. Sheng, P.G. Du, H.Y. Li, Re-view on clinical application of deproteinized calf blood extractive, in: Appl. Mech. Mater., Trans Tech Publ, (2014) 1617–1621. ## [155] Y. Zamani, H. Ghazanfari, G. Erabi, A. Moghanian, B. Fakić, S.M. Hosseini, B.P. Mahammod, A review of additive manufacturing of Mg-based alloys and composite implants, J. Compos. Compd. 3 (2021) 71–83. ## [156] K. Gunawardana, Introduction of Advanced Manufacturing Technology: a literature review, Sabaragamuwa Univ. J. 6 (2006) 116–134. ## [157] J. Savolainen, M. Collan, How additive manufacturing technology changes business models?–review of literature, Addit. Manuf. 32 (2020) 101070. ## [158] F.T.S. Chan, M.H. Chan, H. Lau, R.W.L. Ip, Investment appraisal techniques for advanced manufac-turing technology (AMT): a literature review, Integr. Manuf. Syst. (2001). ## [159] M. Vaezi, H. Seitz, S. Yang, A review on 3D micro-additive manufacturing technologies, Int. J. Adv. Manuf. Technol. 67 (2013) 1721–1754. ## [160] C.-H. Chen, J.M.-J. Liu, C.-K. Chua, S.-M. Chou, V.B.-H. Shyu, J.-P. Chen, Cartilage tissue engineering with silk fibroin scaffolds fabricated by indirect additive manufacturing technology, Mate-rials (Basel). 7 (2014) 2104–2119. ## [161] H. Canziani, S. Chiera, T. Schuffenhauer, S. Kopp, F. Metzger, A. Bück, M. Schmidt, N. Vogel, Bottom-Up Design of Composite Supraparticles for Powder-Based Additive Manufacturing, Small. 16 (2020) 2002076. ## [162] S. Dolnicar, A. Chapple, A.J. “ANGIOSTRONGYLUS-V.I.N.D.I.N.W.. V.R. 120. 1. (1987): 424-424. ## [163] L. Zhao, X. Wang, H. Xiong, K. Zhou, D. Zhang, Op-timized preceramic polymer for 3D structured ceramics via fused deposition modeling, J. Eur. Ceram. Soc. 41 (2021) 5066–5074. ## [164] K. Ryan, Additive Manufacturing of Graphene Nanoplatelets and Hexagonal Bo-ron Nitride Composites Via Stereolithography, (2020). ## [165] S. Jang, S. Park, C. Bae, Development of ce-ramic additive manufacturing: process and materials technology, Biomed. Eng. Lett. (2020) 1–11. ## [166] L.J. Tan, W. Zhu, K. Zhou, Recent progress on polymer materials for additive manufacturing, Adv. Funct. Ma-ter. 30 (2020) 2003062. ## [167] M. Warschauer, Researching technology in TESOL: Determinist, instrumen-tal, and critical approaches, TESOL Q. 32 (1998) 757–761. ## [168] J. Zhou, J. Lin, X. Huang, Y. Zhou, Y. Chen, J. Xia, H. Wang, Y. Xie, H. Yu, J. Lei, A library of atomically thin metal chalcogenides, Nature. 556 (2018) 355–359. ## [169] T. Jungst, W. Smolan, K. Schacht, T. Scheibel, J. Groll, Strategies and molecular design criteria for 3D printable hydrogels, Chem. Rev. 116 (2016) 1496–1539. ## [170] U. Jammalamadaka, K. Tappa, Recent advances in biomaterials for 3D printing and tissue engineering, J. Funct. Biomater. 9 (2018) 22. ## [171] A. Bruyas, F. Lou, A.M. Stahl, M. Gardner, W. Maloney, S. Goodman, Y.P. Yang, Sys-tematic characterization of 3D-printed PCL/β-TCP scaffolds for biomedical devices and bone tissue engineer-ing: Influence of composition and porosity, J. Mater. Res. 33 (2018) 1948–1959. ## [172] M. Vaezi, S. Chian-rabutra, B. Mellor, S. Yang, Multiple material additive manufacturing–Part 1: a review: this review paper co-vers a decade of research on multiple material additive manufacturing technologies which can produce com-plex geometry parts with different materials, Virtual Phys. Prototyp. 8 (2013) 19–50. ## [173] H. Li, B.-J. Li, Z.-J. Shi, Challenge and progress: palladium-catalyzed sp 3 C–H activation, Catal. Sci. Technol. 1 (2011) 191–206. ## [174] Functionalized NiFe2O4/mesopore silica anchored to guanidine nanocomposite as a catalyst for synthesis of 4H-chromenes under ultrasonic irradiation, J. Compos. Compd. 3 (2021). https://doi.org/10.52547/jcc.3.2.1. ## [175] S. Nasibi, K. Alimohammadi, L. Bazli, S. Eskandarinezhad, A. Mohammadi, N. Sheysi, TZNT alloy for surgical implant applications: A systematic review, J. Compos. Compd. 2 (2020) 62–68. ## [176] S.H. Park, T.G. Kim, H.C. Kim, D.-Y. Yang, T.G. Park, Development of du-al scale scaffolds via direct polymer melt deposition and electrospinning for applications in tissue regenera-tion, Acta Biomater. 4 (2008) 1198–1207. ## [177] S. Naghieh, M.R.K. Ravari, M. Badrossamay, E. Fo-roozmehr, M. Kadkhodaei, Numerical investigation of the mechanical properties of the additive manufactured bone scaffolds fabricated by FDM: the effect of layer penetration and post-heating, J. Mech. Behav. Biomed. Mater. 59 (2016) 241–250. ## [178] M.L. Muerza-Cascante, D. Haylock, D.W. Hutmacher, P.D. Dalton, Melt electrospinning and its technologization in tissue engineering, Tissue Eng. Part B Rev. 21 (2015) 187–202. ## [179] T.G. Kim, D.S. Lee, T.G. Park, Controlled protein release from electrospun biodegradable fiber mesh composed of poly (ɛ-caprolactone) and poly (ethylene oxide), Int. J. Pharm. 338 (2007) 276–283. ## [180] O. Mazalevska, M.H. Struszczyk, I. Krucinska, Design of vascular prostheses by melt electrospinning—structural characterizations, J. Appl. Polym. Sci. 129 (2013) 779–792. ## [181] V. Balouchi, F.S. Jazi, A. Saidi, Devel-oping (W, Ti) C-(Ni, Co) nanocomposite by SHS method, J. Ceram. Process. Res. 16 (2015) 605–608. ## [182] A. Deraine, M.T. Rebelo Calejo, R. Agniel, M. Kellomäki, E. Pauthe, M. Boissière, J. Massera, Poly-mer-Based Honeycomb Films on Bioactive Glass: Toward a Biphasic Material for Bone Tissue Engineering Applications, ACS Appl. Mater. Interfaces. (2021). ## [183] M. Wang, Composite scaffolds for bone tissue engineering, Am. J. Biochem. Biotechnol. (2006). ## [184] I.O. Oladele, T.F. Omotosho, A.A. Adediran, Pol-ymer-based composites: an indispensable material for present and future applications, Int. J. Polym. Sci. 2020 (2020). ## [185] K.T. Arul, E. Manikandan, R. Ladchumananandasivam, Polymer-based calcium phosphate scaffolds for tissue engineering applications, in: Nanoarchitectonics Biomed., Elsevier, (2019) 585–618. ## [186] L. Bazli, M. Yusuf, A. Farahani, M. Kiamarzi, Z. Seyedhosseini, M. Nezhadmansari, M. Aliasghari, M. Iranpoor, Application of composite conducting polymers for improving the corrosion behavior of various sub-strates: A Review, J. Compos. Compd. 2 (2020) 228–240. ## [187] S. V Dorozhkin, Calcium orthophosphate-based bioceramics, Materials (Basel). 6 (2013) 3840–3942. ## [188] W. Zakrzewski, M. Dobrzynski, Z. Rybak, M. Szymonowicz, R.J. Wiglusz, Selected nanomaterials’ application enhanced with the use of stem cells in acceleration of alveolar bone regeneration during augmentation process, Nanomaterials. 10 (2020) 1216. ## [189] Y. Liu, J. Lim, S.-H. Teoh, Development of clinically relevant scaffolds for vascularised bone tissue engineering, Biotechnol. Adv. 31 (2013) 688–705. ## [190] P. Bartolo, J.-P. Kruth, J. Silva, G. Levy, A. Malshe, K. Rajurkar, M. Mitsuishi, J. Ciurana, M. Leu, Biomedical production of implants by additive elec-tro-chemical and physical processes, CIRP Ann. 61 (2012) 635–655. ## [191] Y.-M. Huang, Y.-C. Lin, C.-Y. Chen, Y.-Y. Hsieh, C.-K. Liaw, S.-W. Huang, Y.-H. Tsuang, C.-H. Chen, F.-H. Lin, Thermosensitive chitosan–gelatin–glycerol phosphate hydrogels as collagenase carrier for tendon–bone healing in a rabbit model, Poly-mers (Basel). 12 (2020) 436.