1 Biocompatible coatings for composite medical implants: enhancing integration and performance 1 Biocompatible coatings are vital in enriching the performance of composite materials used in medical implants and prosthetics. These coatings improve the interaction between implants and biological tissues, boosting integration and overall functionality. The article discusses three main types of coatings includes polymer coatings (flexible and easy to apply), ceramic coatings (providing hardness and corrosion resistance), and composite coatings (combining polymers and ceramics for enhanced properties). Various fusion techniques, such as spray coating, dip coating, and electrospinning, are employed to achieve optimal coating characteristics. The article also highlights the importance of surface and mechanical testing to assess coating stability. In biomedicalapplications, coatings like hydroxyapatite for bone integration and titanium-based coatings for wear resistance are critical. Despite advances, challenges remain in creating durable, customizable coatings for specific applications. Ongoing research purposes to develop responsive coatings with smart functionalities, offering potential progresses in medical implant performance 1 6 Zahra kheradmand Volgograd State Medical University Russia zahrakheradmand9@yahoo.com Taha Mohammadi Volgograd State Medical University Russia info@jourcc.com Grace Iyaloo Tukuna Mukete Volgograd State Medical University, Volgograd Russia info@jourcc.com Biocompatible Coatings Composite Medical Implants Ceramic Coatings Composite Coatings Article4.pdf [1] K.K. Amirtharaj Mosas, A.R. Chandrasekar, A. Dasan, A. Pakseresht, D. Galusek, Recent advancements in materials and coatings for biomedical implants, Gels 8(5) (2022) 323.##[2] R. Rasouli, A. Barhoum, H. Uludag, A review of nanostructured surfaces and materials for dental implants: surface coating, patterning and functionalization for improved performance, Biomaterials science 6(6) (2018) 1312-1338.##[3] V. Vishwakarma, G.S. Kaliaraj, K.K. Amirtharaj Mosas, Multifunctional coatings on implant materials—A systematic review of the current scenario, Coatings 13(1) (2023) 69.##[4] R.G. Puri, A. Khanna, Intumescent coatings: A review on recent progress, Journal of Coatings Technology and Research 14(1) (2017) 1-20.##[5] M.J. Nine, M.A. Cole, D.N. Tran, D. Losic, Graphene: a multipurpose material for protective coatings, Journal of Materials Chemistry A 3(24) (2015) 12580-12602.##[6] M. Ates, A review on conducting polymer coatings for corrosion protection, Journal of adhesion science and Technology 30(14) (2016) 1510-1536.##[7] S.K. Kyei, G. Darko, O. Akaranta, Chemistry and application of emerging ecofriendly antifouling paints: a review, Journal of Coatings Technology and Research 17 (2020) 315-332.##[8] H.-X. Peng, Polyurethane nanocomposite coatings for aeronautical applications, Multifunctional polymer nanocomposites. CRC Press, Boca Raton (2011) 337-387.##[9] L.J. Procopio, Acrylic Coatings, (2015).##[10] F.N. Jones, M.E. Nichols, S.P. Pappas, Organic coatings: science and technology, John Wiley Sons2017.##[11] N.K. Akafuah, S. Poozesh, A. Salaimeh, G. Patrick, K. Lawler, K. Saito, Evolution of the automotive body coating process—A review, Coatings 6(2) (2016) 24.##[12] H.M. Kwaambwa, A review of current and future challenges in paints and coatings chemistry, (2013).##[13] K. Arun, M. Udhayakumar, N. Radhika, A Comprehensive review on various ceramic nanomaterial coatings over metallic substrates: applications, challenges and future trends, Journal of Bio-and Tribo-Corrosion 9(1) (2023) 11.##[14] K. Mondal, L. Nuñez III, C.M. Downey, I.J. Van Rooyen, Thermal barrier coatings overview: Design, manufacturing, and applications in high-temperature industries, Industrial Engineering Chemistry Research 60(17) (2021) 6061-6077.##[15] F. Findik, Latest progress on tribological properties of industrial materials, Materials Design 57 (2014) 218-244.##[16] D.K. Rajak, D.D. Pagar, R. Kumar, C.I. Pruncu, Recent progress of reinforcement materials: a comprehensive overview of composite materials, Journal of Materials Research and Technology 8(6) (2019) 6354-6374.##[17] G. Barroso, Q. Li, R.K. Bordia, G. Motz, Polymeric and ceramic silicon-based coatings–a review, Journal of materials chemistry A 7(5) (2019) 1936-1963.##[18] K. Friedrich, A.K. Schlarb, Tribology of polymeric nanocomposites: friction and wear of bulk materials and coatings, Elsevier2011.##[19] C. Lei, Z. Xie, K. Wu, Q. Fu, Controlled vertically aligned structures in polymer composites: natural inspiration, structural processing, and functional application, Advanced Materials 33(49) (2021) 2103495.##[20] A.C. Hee, D. Choudhury, M.J. Nine, N.A. Abu Osman, Effects of surface coating on reducing friction and wear of orthopaedic implants, Science and Technology of Advanced Materials 15 (2014) 1-21 DOI: 10.1088/1468-6996/15/1/014402.##[21] B. Fotovvati, N. Namdari, A. Dehghanghadikolaei, On coating techniques for surface protection: A review, Journal of Manufacturing and Materials processing 3(1) (2019) 28.##[22] R.D. Andrade, O. Skurtys, F.A. Osorio, Atomizing spray systems for application of edible coatings, Comprehensive reviews in food science and food safety 11(3) (2012) 323-337.##[23] K.-D. Bouzakis, N. Michailidis, G. Skordaris, E. Bouzakis, D. Biermann, R. M'Saoubi, Cutting with coated tools: Coating technologies, characterization methods and performance optimization, CIRP annals 61(2) (2012) 703-723.##[24] Z. Liu, X. Fu, B.P. Binks, H.C. Shum, Mechanical compression to characterize the robustness of liquid marbles, Langmuir 31(41) (2015) 11236-11242.##[25] H.Y. Erbil, Evaporation of pure liquid sessile and spherical suspended drops: A review, Advances in colloid and interface science 170(1-2) (2012) 67-86.##[26] O. Fayomi, O. Agboola, I. Akande, A. Emmanuel, Challenges of coatings in aerospace, automobile and marine industries, AIP Conference Proceedings, AIP Publishing, 2020.##[27] A. Matin, U. Baig, S. Akhtar, N. Merah, M. Gondal, A.H. Bake, A. Ibrahim, UV-resistant and transparent hydrophobic surfaces with different wetting states by a facile dip-coating method, Progress in Organic Coatings 136 (2019) 105192.##[28] M. Faustini, B. Louis, P.A. Albouy, M. Kuemmel, D. Grosso, Preparation of sol− gel films by dip-coating in extreme conditions, The Journal of Physical Chemistry C 114(17) (2010) 7637-7645.##[29] D. Grosso, How to exploit the full potential of the dip-coating process to better control film formation, Journal of Materials Chemistry 21(43) (2011) 17033-17038.##[30] M.A. Butt, Thin-film coating methods: a successful marriage of high-quality and cost-effectiveness—a brief exploration, Coatings 12(8) (2022) 1115.##[31] D. Reneker, A. Yarin, E. Zussman, H. Xu, Electrospinning of nanofibers from polymer solutions and melts, Advances in applied mechanics 41 (2007) 43-346.##[32] I. Pleşa, P.V. Noţingher, S. Schlögl, C. Sumereder, M. Muhr, Properties of polymer composites used in high-voltage applications, Polymers 8(5) (2016) 173.##[33] C. Wang, T. Hashimoto, A scenario of a fiber formation mechanism in electrospinning: Jet evolves assemblies of phase-separated strings that eventually split into as-spun fibers observed on the grounded collector, Macromolecules 53(21) (2020) 9584-9600.##[34] R. Nayak, R. Padhye, Nano fibres by electro spinning: Properties and applications, J. Text. Eng. Fash. Technol 2(5) (2017) 486-497.##[35] A. Kausar, Polymer coating technology for high performance applications: Fundamentals and advances, Journal of Macromolecular Science, Part A 55(5) (2018) 440-448.##[36] C. Verma, M. Quraishi, K. Rhee, Hydrophilicity and hydrophobicity consideration of organic surfactant compounds: Effect of alkyl chain length on corrosion protection, Advances in Colloid and Interface Science 306 (2022) 102723.##[37] E. Korin, N. Froumin, S. Cohen, Surface analysis of nanocomplexes by X-ray photoelectron spectroscopy (XPS), ACS Biomaterials Science Engineering 3(6) (2017) 882-889.##[38] M.A. Isaacs, J. Davies-Jones, P.R. Davies, S. Guan, R. Lee, D.J. Morgan, R. Palgrave, Advanced XPS characterization: XPS-based multi-technique analyses for comprehensive understanding of functional materials, Materials Chemistry Frontiers 5(22) (2021)7931-7963.##[39] A. Gujrati, S.R. Khanal, L. Pastewka, T.D. Jacobs, Combining TEM, AFM, and profilometry for quantitative topography characterization across all scales, ACS applied materials interfaces 10(34) (2018) 29169-29178.##[40] W. Zhai, L. Bai, R. Zhou, X. Fan, G. Kang, Y. Liu, K. Zhou, Recent progress on wear‐resistant materials: designs, properties, and applications, Advanced Science 8(11) (2021) 2003739.##[41] D. Carrera, F. Manganini, G. Boracchi, E. Lanzarone, Defect detection in SEM images of nanofibrous materials, IEEE Transactions on Industrial Informatics 13(2) (2016) 551-561.##[42] R.B. Heimann, Plasma-sprayed hydroxylapatite-based coatings: chemical, mechanical, microstructural, and biomedical properties, Journal of Thermal Spray Technology 25(5) (2016) 827-850.##[43] C.J. Brinker, G.W. Scherer, Sol-gel science: the physics and chemistry of sol-gel processing, Academic press2013.##[44] F. Walsh, C. Ponce de Leon, A review of the electrodeposition of metal matrix composite coatings by inclusion of particles in a metal layer: an established and diversifying technology, Transactions of the IMF 92(2) (2014) 83-98.##[45] R.A. Surmenev, M.A. Surmeneva, A.A. Ivanova, Significance of calcium phosphate coatings for the enhancement of new bone osteogenesis–a review, Acta biomaterialia 10(2) (2014) 557-579.##[46] R. Eason, Pulsed laser deposition of thin films: applications-led growth of functional materials, John Wiley Sons2006.##[47] T. Kokubo, H. Takadama, How useful is SBF in predicting in vivo bone bioactivity?, Biomaterials 27(15) (2006) 2907-2915.##[48] A. Boccaccini, S. Keim, R. Ma, Y. Li, I. Zhitomirsky, Electrophoretic deposition of biomaterials, Journal of the Royal Society Interface 7(suppl_5) (2010) S581-S613.##[49] M. Horgnies, J. Chen, C. Bouillon, Overview about the use of Fourier transform infrared spectroscopy to study cementitious materials, WIT Trans. Eng. Sci 77 (2013) 251-262.##[50] A. Laroche, Ice Adhesion Strength and Durability of Nanostructured Coatings for Aerospace Applications, (2021).##[51] D.E. Wolfe, C.J. Ryan, C.M. DeSalle, S.P. Stepanoff, B.I. Aronson, Z.M. Boring, J.A. Reiss, P.E. Albert, J.K. Nicastro, A.P. Fjeldsted, A comprehensive review of modern engineered ceramics coatings for optimised resistance to wear and corrosion, Advances in Applied Ceramics 122(3-4) (2023) 81-100.##[52] S. Croll, Surface roughness profile and its effect on coating adhesion and corrosion protection: A review, Progress in organic Coatings 148 (2020) 105847.##[53] M. Amer, Q. Hayat, V. Janik, N. Jennett, J. Nottingham, M. Bai, A review on in situ mechanical testing of coatings, Coatings 12(3) (2022) 299.##[54] L. Bazli, M. Yusuf, A. Farahani, M. Kiamarzi, Z. Seyedhosseini, M. Nezhadmansari, M. Aliasghari, M. Iranpoor, Application of composite conducting polymers for improving the corrosion behavior of various substrates: A Review, Journal of Composites and Compounds 2(5) (2020) 228-240.##[55] A. Thakur, A. Kumar, S. Kaya, R. Marzouki, F. Zhang, L. Guo, Recent advancements in surface modification, characterization and functionalization for enhancing the biocompatibility and corrosion resistance of biomedical implants, Coatings 12(10) (2022)1459.##[56] R.N. Azadani, M. Sabbagh, H. Salehi, A. Cheshmi, A. Raza, B. Kumari, G. Erabi, Sol-gel: Uncomplicated, routine and affordable synthesis procedure for utilization of composites in drug delivery, Journal of Composites and Compounds 3(6) (2021) 57-70.##[57] M. Arefian, M. Hojjati, I. Tajzad, A. Mokhtarzade, M. Mazhar, A. Jamavari, A review of Polyvinyl alcohol/Carboxymethyl cellulose (PVA/CMC) composites for various applications, Journal of Composites and Compounds 2(3) (2020) 69-76.##[58] J.C. Kim, M. Lee, I.-S.L. Yeo, Three interfaces of the dental implant system and their clinical effects on hard and soft tissues, Materials horizons 9(5) (2022) 1387-1411.##[59] J. Li, R. Zhu, J. Yuan, X. Lu, S. Zhao, M. Xu, J. Huang, Y. Tu, J. Jiang, L. Deng, Phase stability, microstructure and mechanical properties of nanostructured yttria stabilized zirconia coatings subjected to moisture degradation, Ceramics International 48(21) (2022) 31800-31810.##[60] G.M. Esteves, J. Esteves, M. Resende, L. Mendes, A.S. Azevedo, Antimicrobial and antibiofilm coating of dental implants—past and new perspectives, Antibiotics 11(2) (2022) 235.##[61] J. Meng, X. Liu, C. Niu, Q. Pang, J. Li, F. Liu, Z. Liu, L. Mai, Advances in metal–organic framework coatings: versatile synthesis and broad applications, Chemical Society Reviews 49(10) (2020) 3142-3186.##[62] P. Yang, F. Zhu, Z. Zhang, Y. Cheng, Z. Wang, Y. Li, Stimuli-responsive polydopamine-based smart materials, Chemical Society Reviews 50(14) (2021) 8319-8343.